FuDao three-axis hard rail machining center VMC1890

NegotiableUpdate on 03/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

FuDao three-axis hard rail machining center VMC1890

Product Details

uThe basic castings of the machine tool are all made ofhigh qualityResin sand castings,Strong and toughThe rib layout is reasonable and has undergone two artificial aging treatments, with high bearing capacity, good stability, high strength, and stable and reliable accuracy in all aspects,Clear stress for a long time without deformation

uWe use imported P4 grade spindle bearings, which have undergone computer balance calibration and running in testing to ensure maximum axial and radial rigidity and machining accuracy,Ensured the advantages of high reliability, long lifespan, low noise, minimal vibration, and high precision of the spindle，Adopting a pressurized knife cylinder for quick knife unloading.

uAll three axes are made of original Taiwan equipmentC3Grade precision ball screw, installationP4Grade bearings ensure positioning accuracy and repeatability accuracy, and the three axes use original Mitsubishi servo motors and spindle motors from Japan, with direct drive to ensure feed accuracy under strong load-bearing capacity.

uThe linear guide adopts imported rolling linear guide, which has low sliding friction resistance, fast motion speed, and correspondingly fast micro feed. There is no crawling at low speeds and no vibration at high speeds, improving the motion accuracy and response speed of the machine tool.

usystemAdopting the world's advanced Mitsubishi M80Numerical control system,Personalized interface, convenient operation, fiber optic transmission of the driver, stable and reliable data, convenient management of network cable transmission, fast and convenient transmission. Built in memory card, with a maximum capacity of2G, the program directly calls，Latest MitsubishiM80All series controllers are equipped with RISC64 bit CPU，systemAll adopt servo drive, ensuring high stability, fast speed, smooth surface, high precision and other advantages of the control system. It has the functions required for manufacturing molds and is the choice for mold production

Machine Data\\model	unit	VMC-1580	VMC-1690	VMC-1890
XAxial travel	mm	1500	1600	1800
Travel Y-axis	mm	800	900	900
Z-axis travel	mm	700	680	680
Distance from spindle end face to worktable	mm	170870	160840	160-840
Distance from spindle center to column protection surface	mm	810	950	950
Workbench size	mm	1700×800	1800×900	2000×900
Workbench load-bearing capacity	kg	1600	1600	1800
workbenchesTgroove(Number of slots - size×spacing)	mm	5-22×135	5-22×165	5-22×165
Main spindle taper specification		BT50	BT50	BT50
Spindle speed (optional)	rpm/mm	8000/10000	8000/10000	8000/10000
Spindle motor power	kw	18.5	18.5	18.5
Three axis motor power（X/Y/Z）	kw	4.5/4.5/4.5	4.5/4.5/4.5	4.5/4.5/4.5
X/Y/Z axis fast movement speed	m/min	18/18/16	18/18/16	18/18/16
feed rate	m/min	0-10000	0-10000	0-10000
positioning accuracy	mm	JIS±0.005/300	JIS±0.005/300	JIS±0.005/300
repeatability	mm	JIS±0.003/300	JIS±0.003/300	JIS±0.003/300
Air pressure demand	Kg/cm²	≥6	≥6	≥6
tool magazine	grasp	16/20/24	16/20/24	16/20/24
Machine weight	Kg	13500	13500	15500
Machine dimensions (length x width x height)	mm	39003300×3500	41003500×3550	44003500×3550

Standard configuration:

1. Mitsubishi System

2. Belt type spindle

3. Spindle blowing system

4. Oil cooler

5. Cutting cooling unit

6. Full face sheet metal

7. Electrical box heat exchanger

8. Centralized automatic lubrication system

9. Jianchun or Luoyi spindle

10. Taiwan Shangyin Production Wire Rod/PAM

11. Three axis full face anti chip telescopic cover

12. Three axis screw pre tensioning device

13. Program storage function

14. Horizontal screw and cushion block

15. Transformer

16. NSK bearings from Japan

17. Pneumatic cutting device

18. Adjusting tools and toolboxes

19. Mobile handwheel

20. LED work lighting

21. Rigid tapping teeth

22. Operation and Programming Manual

23. Oil proof line

24. Contact Schneider/Omron

25. Silver/PAM

26. Knife Bucket Appreciation

Explanation: Due to continuous product improvement, the appearance and technical parameters of this machine tool are for reference only. The actual appearance and technical parameters are subject to the time of ordering.

Related searches: High speed machining center | High speed engraving and milling machine | Taiwan Fudao milling machine | Taiwan spark machine | High speed drilling and tapping center