Frequency characteristic analyzer TBVNA-6000

Frequency characteristic analyzer TBVNA-6000

Frequency characteristic analyzer TBVNA-6000Capable of multiple measurement functions, able to conduct detailed analysis of RF devices and components. The bandwidth ratio of this instrument is1 : 6000000000Covering measurement applications from audio to RF. Active through its full DC couplingVSWRElectric bridge, even at low levels1HzHigh accuracy can also be maintained in the measurement. This instrument can simultaneously use four independent measurement channels to achieve fast and accurate dual port measurements.

Analysis software has rich tools, such as spectrum analyzers or oscilloscopes, making the instrument a versatile assistant in development or testing applications.

n TBVNA-6000frequency range1Hz-6.0GHz, Resolution0.1Hz.

n signal generator@Unmodulated continuous wave1Hz-6.0GHzand0.1HzThe resolution

n 60 MHzDigital Oscilloscope@4通道、125Ms/sand14bitresolution

n 1Hz-6GHzSpectrum analyzer, equipped withDC-60 MHzClear frequency range and support up to6GHzActive sideband suppression for non spurious signal measurement under certain conditions.

n Dual channel spectrum analysis with cross-correlation

n IQStream receiver and file or Ethernet stream capability.(GNU radio compatible /Software Defined Radio)

n Power scanning measurement

n RF broadband power/voltage measurement

n THDAnalyzer (Harmonic Distortion Analysis)

n Phase noise analyzer.

n General noise and signal measurement

n BODETwo additional high impedance inputs have been added,1MOhm // 15PfUsed for gain/Phase measurement and/Or as a vector voltmeter

n BODEAdded an additional high-voltage signal output（+/- 10VHigh impedance and+/- 5Venter50Ohm), with a bandwidth of> 200 MHz(Full power)