Floating submersible aerator floating river aerator

Floating submersible aerator Floating river aerator Product Overview:

FQBThe submersible floating aerator is a device that utilizes the originalNQXBThe installation form of the submersible aerator (with a submersible motor), which is positioned at the bottom of the pool by its own weight, has been changed to a floating installation form that uses dual inlet pipes and is suspended in the water by a floating ring. nowNQXBWhen installing and maintaining a type of aerator, if there is water in the sewage tank and personnel cannot operate it, a crane needs to be inserted into the tank for lifting or transporting after draining the water in the tank. Moreover, this installation form requires a hard foundation or platform for support. After improvement in designFQBThe type of aerator is not only suitable for working in aeration tanks, but also for working in soft foundation environments such as oxidation ponds, fish ponds, landscape lakes, sewage channels, and rivers. Therefore, it has been improved and designedFQBThis makes installation more convenient, time-saving, and labor-saving, and expands the scope of use of submersible aeration.

Floating submersible aerator and floating river aerator working principle:

FQBOriginalNQXBOn the basis of this, single-sided intake is changed to double-sided intake or center intake, and a floating ring (made of stainless steel or fiberglass) is installed on the upper part of the intake pipe. The floating ring, intake pipe, and aerator are connected as a whole. As shown in the figure, the floating ring relies on the buoyancy of water to suspend the aerator in the water. The floating ring is pulled by three steel wire ropes, and the other end of the steel wire rope is fixed to the edge of the pool or fixed with three anchor points in the pond. During installation, place the aerator and floating ring into the water as a whole, and drag them to the designated area with steel wire ropes. Then fix the other end of the three steel wire ropes in three different directions at the edge of the pond. For ponds with larger water surfaces, three anchor points can be set up for positioning. During maintenance, simply untie the steel wire rope fixed at the edge of the pool, pull the equipment back to the edge of the pool and lift it out of the water.

The upper end of the intake pipe is the air intake port, located above the water surface, and the lower end is connected to the mixing chamber. After the power is turned on, due to the rotation of the impeller, water flows out from the impeller outlet, forming negative pressure through the mixing chamber. Therefore, air is sucked in and mixed with sewage, and the mixed liquid flows out from the outlet to complete the oxygenation of sewage.

Structural features:

1、 Floating positioning, easy to install, can be freely arranged and moved without interrupting process operation;

2、 Compact design structure, utilizing self-priming function without the need for external air source,Uniform bubbles;

3Underwater operation of the host, no ground equipment, low noise;

4It can be directly used in large areas of water such as oxidation ponds, rivers, and fish ponds without any infrastructure;

5During aeration, it also has a stirring function.

Technical features:

QFBSubmersible floating aeratorIt consists of a float, a concealed turning bracket, a submersible motor, a mixing chamber, a base, an intake pipe, and a muffler.andNQXBThe main structure, performance parameters, and external dimensions of the submersible centrifugal aeratorSame.

Never allow the use of cables to move the aerator during lifting, hanging, or handling. You can use a chain hook on the handle or cover the lifting ring.

Before starting for the first time, check the direction of rotation of the impeller. Incorrect rotation can reduce efficiency and damage the motor. Do not move the aerator without disconnecting the power supply.