Centrifugal submersible aerator, water circulation aerator

Centrifugal submersible aerator, water circulation aeratorMain purpose and scope of application：

Centrifugal submersible aerator, water circulation aeratorPrinciple:

The QXB centrifugal submersible aerator is a direct coupled structure. The rotating impeller generates a centrifugal force in the water, which creates a negative pressure zone around the impeller. Air is sucked in through the intake pipe, and the sucked in air and water mix in the mixing disc. Then, this good and uniform mixture is automatically sprayed out from around the outlet.

This process includes the following aspects: the mixing of air and water in the mixing tray produces a gas-liquid mixing effect, and the gas-liquid mixture discharged from the outlet forms circulation and convection; The high-speed movement of oxygen in a large number of air molecules can be obtainedJ has good oxygen absorption efficiency.

Features:

1 J has a good oxygen dissolution rate, a large proportion of small bubbles, high oxygenation efficiency, and a wide oxygenation area;

There is no dead zone in the pool, and the horizontal exposure airflow carrying bubbles can flush every corner of the pool bottom;

3. Bearings with simple and compact structure, long service life of the unit, and the ability to withstand high loads, using oil bath shaft seals and air suction into the impeller chamber to prevent water from coming into contact with the seals during operation, all ensure that the aerator can work continuously for 24 hours and run for a long time;

4. Save engineering investment, no need to provide gas source, eliminate blower, easy installation, low noise;

use

1. Check the rotation direction of the impeller to ensure that it rotates counterclockwise.
2. Start the submersible aerator and observe its operation to ensure there are no abnormalities.
3. Adjust the aeration rate and operating time as needed.