-
E-mail
info@conasen.com
- Phone
-
Address
2-1702, Beichen New Era Building, No. 13 Beiyuan Road, Chaoyang District, Beijing
Product Categories
Beijing Kangansen Instrument Technology Co., Ltd
Float switch SWITCH-TEK series LV10
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
● Damping body design, floating body stability, can eliminate switch oscillation ● Immersion sensors and cables made of PP or PVDF materials, suitable for corrosive liquids. ● 15VA dry contact, controllable normally open or normally closed through wiring selection ● Compatible with Smart Trak and Switch Pak installation accessories
Product Details
Product Introduction
The LOWLINE float switch SWITCH-TEK series LV10 is a universal point type float level switch that uses a 15VA reed switch output to reliably detect the liquid level of relatively clean water and chemical solvents. Applicable media include boric acid and ultrapure water. Damping body can eliminate the oscillation of liquid level switch caused by disturbance. The immersion liquid leakage detection sensor is made of polypropylene (PP) or polyvinylidene fluoride (PVDF) material, vertically installed in the storage tank, and used for high or low liquid level alarm.
Technical Specifications
Installation position: Vertical installation ± 20 °
Accuracy: ± 2mm (in water)
Repeatability: ± 1mm (in water)
Specific gravity: minimum 0.8
Contact type: (1) SPST spring
Contact output: normally open (NO) or normally closed (NC) optional
Working temperature: -40 ℃ to 90 ℃
Pressure: 2 bar at 25 ℃, temperature per
Increase by 1 degree and decrease by 0.113 bar
Protection level: NEMA 6 (IP68)
Sensor material: PP or PVDF
Cable sheath: PP or PFA
Cable type: 3-core shielded
Cable length: 10 "(3m)
Installation interface: 3/4 "NPT
Grade: Universal Type
Certification: CE
Similar Product Recommend
