Flat type defogger

Our company produces FRPP reinforced polypropylenedemisterThe blades are produced using extrusion molding technology, which has the characteristics of unrestricted blade length, good overall integrity of the defogger, and less susceptibility to damage compared to injection molding technology. Due to the use of PP particles in our raw materials, combined with a reasonable proportion of reinforcing materials, it is compatible withCompared with PP defoggers produced from raw materials, PP defoggers have the characteristics of high tensile strength, high load-bearing strength, resistance to melting and deformation, and good temperature resistance: they can withstand temperatures up to 100 ℃ in a short period of timePP defogger for short timeThe temperature resistance is only 70 ℃.

Technical features:

(1) Pressure drop: Without considering the interference before and after the defogger, ensure thatUnder flue gas load, the pressure drop of the entire defogger system is less than 120Pa

(2) Mist removal efficiency: Under normal operating conditions, the concentration of fog droplets in the flue gas at the outlet of the defogger is less than 75mg/Nm3;

(3) Export droplet content: ≤ 75mg/N3 (dry basis)

(4) Pressure resistance: Ensure that the blades can work normally when subjected to a flushing water pressure of 0.3MPa.

(5) Smoke flow rate: 2.8-4.0m/s (empty tower gas velocity)

(6) Segmented droplet size: ≥ 26 μ m

(7) Rinse nozzle: Full cone nozzle, with a rinse water spray angle of 90-120 degrees, spraying solid cones to ensure that all blades are covered.

The main products produced by the company are:Mist remover series products, fiberglass desulfurization and purification overall equipment and accessories, fiberglass wrapped pipelines, storage tanks, chimneys, desulfurization flues, fiberglass cooling towers and accessories, spray towers, purification towers, fans, pultrusion series products and molded series products, etc.