Fiber optic distribution box (ODF rack)

NegotiableUpdate on 11/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ODF is a fiber optic distribution equipment designed specifically for fiber optic communication rooms

Product Details

ODF is a fiber optic distribution equipment designed specifically for fiber optic communication rooms. It has the functions of fixing and protecting optical cables, terminating and adjusting optical cables, as well as protecting the core and tail fibers of optical cables. It can be assembled separately as a fiber optic distribution frame or installed together with the digital distribution unit and audio distribution unit in the same cabinet/rack. Construct a comprehensive distribution frame. This device has flexible configuration, simple installation and use, easy maintenance and management, and is an essential equipment for fiber optic communication cable network terminals or relay points to achieve fiber routing, fiber skipping cable fusion and access.
The structural components of the product are made of thickened galvanized and passivated cold-rolled steel plates and surface spraying technology. The fiber optic distribution tray is made of plastic material doped with flame-retardant materials, which is lightweight, flexible, and durable. The large-diameter winding ring design keeps the curvature radius of the tail fiber and jump fiber above 40mm at each point. It can be assembled separately into a fiber optic distribution frame or combined with digital and audio distribution units in a cabinet/rack to form a comprehensive distribution frame. It has functions such as fiber optic cable introduction, fixation, and protection, fiber optic cable termination and tail fiber fusion, line adjustment, and storage and protection of fiber optic cable cores and tail fibers through fiber skipping storage.
The wiring box adopts a drawer style structure, which can be pulled out during operation and put back after completion. There are fiber optic cable entry holes and fixed modules at the rear of the chassis, which are then introduced into the distribution box through the fiber optic cable winding rack; The structure of the fiber optic distribution tray is an openable upper and lower layer structure: open the upper layer, connect the tail fiber optic connector to the lower layer adapter, and then wind it along the cable tray through the outlet hole to the upper layer, which can be closed. After the tail fiber head is fused with the introduced fiber core, fix the melting point in the slot and stick it, completing the operation. Insert the distribution tray into the corresponding layer; Below the distribution box is the fiber skipping storage disk, which is flexible and convenient to use as each functional module can be operated separately
The standard unit structure size is 19 inches wide, which can be installed in patch panel cabinets or wall mounted.

[Order information]

name	model	Specification (length)wideHigh)	Configuration (Core)	Remarks
single yuan body	SJ-ODF24	43043070	24	Used on the rack
	SJ-ODF48	430300140	48	Used on the rack
	SJ-ODF72	430300200	72	Used on the rack
	SJ-ODF96	430300255	96	Used on the rack