FY2010 series coating thickness gauge

Introduction: The FY2010/FY2020 probe (F-type) uses magnetic thickness measurement method to measure the thickness of non-magnetic coatings (such as aluminum, chromium, copper, enamel, rubber, paint, etc.) on magnetic metal substrates (such as steel, iron, alloy, and hard magnetic steel, etc.). The FY2030/FY2040 probe (N-type) uses eddy current thickness measurement method to measure the thickness of non-conductive coatings (such as enamel, rubber, paint, plastic, oxide layer on aluminum, etc.) on non-magnetic metal substrates (such as copper, aluminum, zinc, etc.). The FY2050/FY2060 probe (FN type) uses both magnetic and eddy current methods

FY2010/FY2020The measuring head (F-type) adopts magnetic thickness measurement method, which can non destructively measure the thickness of non-magnetic coatings (such as aluminum, chromium, copper, enamel, rubber, paint, etc.) on magnetic metal substrates (such as steel, iron, alloys, and hard magnetic steel, etc.)

FY2030/FY2040 probe (N-type) adopts eddy current thickness measurement method, which can non destructively measure the thickness of non-conductive coatings on non-magnetic metal substrates (such as copper, aluminum, zinc, tin, etc.) (such as enamel, rubber, paint, plastic, oxide layer on aluminum, etc.)

FY2050/FY2060 probe (FN type) uses both magnetic and eddy current methods

There are two methods to calibrate the instrument, and the basic calibration method can be used to correct the systematic error of the measuring head;

There is a buzzing sound during the operation process;

Adopting a low-power design, AA size regular batteries can standby for about 200 hours.

Adopting a 4-digit LCD display, the reading is clear.

The instrument has low voltage prompt and automatic shutdown function

Technical Specifications：