FRANK-PTI Schober flexural strength tester S13505

The FRANK-PTI Schober bending tester S13505 has two sets of A/B folding heads and can test two sets of samples simultaneously. The spring-loaded sample clamping device ensures stable clamping, with a folding speed of 120 times per minute. The instrument automatically stops after detecting sample breakage, and can also be set to a preset folding frequency to stop. Display the number of folds on the touch screen to ensure testing accuracy. This test needs to be conducted on the 23rd; #176; Conducted in a C/50% RH environment.

FRANK-PTI Schober flexural strength tester S13505

The FRANK-PTI Schober bending tester S13505 has two sets of A/B folding heads and can test two sets of samples simultaneously. The spring-loaded sample clamping device ensures stable clamping, with a folding speed of 120 times per minute. The instrument automatically stops after detecting sample breakage, and can also be set to a preset folding frequency to stop. Display the number of folds on the touch screen to ensure testing accuracy. This test needs to be conducted in an environment of 23 ° C/50% RH.

Main features of the equipment:

1 A/B two sets of folding heads, used for simultaneous testing of two sets of samples；

2 Spring loaded sample clamping device；

3 Folding speed: 120Times/min；

4 After detecting sample breakage, the test will automatically stop, and can be upgraded to stop testing after reaching the preset folding times.

Test description:

Cut 2 samples with a sample cutter and insert the folding head at the same timeA and BAnd use the preset tension to clamp it on the sample support device. Press the start button, and the sample rapidly moves back and forth between the folding rollers with a radius of 0.25 mm. If one of the samples breaks, the folding operation continues until the other sample also breaks. The instrument automatically stops, and the number of folds before breakage is displayedtouch screenUp there. Two samples are tested simultaneously. To ensure proper testing behavior, testing should be conducted under suitable environmental conditions (23 ° C/50% RH).