- Phone
-
Address
1925 Moyu Road, Jiading District, Shanghai
Product Categories
Zengyi Testing Technology (Shanghai) Co., Ltd
FOCUS PX Ultrasonic Phased Array Testing System
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Olympus provides users with a complete set of advanced phased array integrated solutions for highly demanding detection equipment, which can meet their very demanding requirements
Product Details
Phased array instruments and equipment used for highly demanding inspections
Olympus provides users with a complete set of advanced phased array integrated solutions that can meet their very demanding requirements. This solution includes FOCUS PX, a high-performance and scalable acquisition unit; FocusPC， A * data collection and analysis software program; Two software development kits (SDKs): FocusControl and FocusData, allow users to customize software interfaces based on their own applications and control the detection process through FocusPC, achieving fully automated detection operations.
FOCUS PX Instrument
High quality signal quality
FOCUS PX uses Olympus technology to provide users with phased array signals, greatly improving signal-to-noise ratio performance.reach, achieve, attain
12 dB
Improvement level of signal-to-noise ratio
Gundam
4 of them
Dedicated UT channel
Scalability and detection performance*
FOCUS PX embodies phased array technology, which can greatly enhance detection performance and improve detection speed in demanding detection applications. Users can use up to 4 FOCUS PX units simultaneously, which not only greatly increases detection speed but also enhances the effectiveness of advanced multi probe configurations.
Gundam
4 units
Simultaneously using FOCUS PX
Gundam
30 MB/s
The data transmission rate
Quick programming
The optimized FOCUS PX communication process greatly reduces programming time, thereby reducing detection cycle time and increasing operator experience.
sturdy and durable
FOCUS PX is a sturdy and durable unit that can be integrated into detection systems under harsh production conditions. Its design complies with the IP65 rating standard, and its casing is equipped with many fins that can optimize heat dissipation performance.
Gundam
40 °C
Operating Temperature
Meets rating standards
IP65
Easy to integrate
The protective cover of FOCUS PX can be easily removed, allowing users to use its exposed 4 screw holes to directly install the unit onto the scanner or detection system.
Simple connection operation
Users can synchronize multiple FOCUS PX units with each other through a simple cable configuration. This allows one unit to receive all I/O signals, reducing wiring operations and greatly simplifying the overall integration process.
Easy to install
Users can not only easily and quickly install FOCUS PX, but also place it very close to the probe, which not only reduces the complexity of the connection, but also optimizes the quality of the signal.
There are 4 screw holes on the unit, which can be directly assembled onto any detection scanner.
Technical Specifications
Before and after
| Phased array channel | 16:64PR: 64 16:128PR/32:128PR: 128 |
|---|---|
| Number of pulse generators | 16: 64PR/16:128PR: 16 consecutive chips 32:128PR: 32 consecutive chips |
| Conventional UT channel | 4 dedicated UT channels (8 interfaces for pulse echo and one transmitter one receiver configuration) |
| Data collection rate | Up to 30 MB/s (one FOCUS PX) Up to 60 MB/s (2 to 4 FOCUS PX) |
| collection speed | Up to 20000 12 bit A-scans per second, each A-scan containing 750 points |
| Wave amplitude resolution | 8-bit/12 bit |
| Number of scanned samples | 16380 |
| Real time data compression | 1: 2000 ratio |
| detection | Full wave, positive half wave, negative half wave, radio frequency wave |
| filtering | Digital bandpass, high pass, and low-pass filters |
| voltage | PA: 4 V, 9 V, 20 V, 40 V, 80 V, and 115 V UT: 50 V, 100 V, and 190 V |
| gain | PA: 80 dB (46 dB analog+34 dB digital) UT: 120 dB (digital) |
| pulse width | PA: 30 ns to 500 ns (step size of 2.5 ns) UT: 30 ns to 1000 ns (step size of 2.5 ns) |
| Bandwidth (-3 dB) | PA：0.6 MHz ～ 17.8 MHz UT：0.25 MHz ～ 28 MHz |
| Number of sound beams | Up to 1024 |
| Pulse repetition frequency (PRF) | 1 Hz ～ 20 kHz |
| Real time average | PA：1, 2, 4, 8, 16 UT：1, 2, 4, 8, 16, 32, 64 |
| number of gates | 4 for detection; 1 for synchronization |
| encoder | Dual axis (orthogonal, clock direction) |
| network port | 1000BASE-T |
| Size (width x height x thickness) with protective cover | 30.7 cm × 13.5 cm × 23.6 cm (12 in. × 5.3 in. × 9.3 in.) |
| Size (width x height x thickness) without protective cover | 27.6 cm × 9.2 cm × 23.1 cm (10.9 in. × 3.6 in. × 9.1 in.) |
| When the weight comes with a protective cover | 4.8 kg (10.5 lb) |
| When weight without protective cover | 4.2 kg (9.2 lb) |
| IP rating | IP65 |
Similar Product Recommend
