FINAT FTM-9 Ring Initial Adhesive Tester

NegotiableUpdate on 02/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The circular initial adhesion tester is mainly used for the initial adhesion of various electronic tapes, protective films, adhesive labels, adhesives and other products. $r $n testing principle: $r $n is the maximum force generated by the instrument automatically separating the annular sample from the standard float test plate at a constant speed of 300mm/min after the annular sample is in contact with the plate at a constant speed of 300mm/min. This maximum force value is the initial adhesion force of the annular sample being tested

Product Details

KT-PSA-1056HCircular initial adhesion tester

Product Usage

Circular initial adhesion testerMainly used for initial adhesion of various electronic tapes, protective films, adhesive labels, adhesives and other products.

Test Principle:
It is to compare the annular specimen with a standard float test plate, in order toAfter a constant speed contact of 300mm/min, the instrument automatically separates the annular sample and the test plate in reverse at a constant speed of 300mm/min. The maximum force generated is the initial adhesion force of the tested sample in the annular shape.

Product Features:

1. The circular initial viscosity testing machine solves the problem of inaccurate initial viscosity test data!
2. The test results are displayed in data and graphics, ensuring the authenticity and accuracy of the test.
3. Meet international standards to make test data more feasible

meet the standard

satisfyFINAT（FINAT Test Method No. 9: Loop tack measurement）

PSTC-16 LOOP TACK

ASTM D6195-03standard test methods for Loop Tack

latestGB/T31125-2014 National Standard (Test Method for Initial Adhesion of Adhesive Tape - Ring Method).

FINAT FTM-9 环形初粘测试仪

Technical Specifications:

measurement range	10KG
measurement accuracy	less than± 1% measurement error
measure speed	300mm/min
speed and accuracy	less than± 1% error
sample size	125.0mm×25.0mm
Test board size	100.0mm×25.0mm×2.0mm
Machine dimensions	High:55cm; Width: 30cm; Depth: 35cm
machine weight	23kg
Use power supply	220V,50HZ
experimental results	Measure the maximum tensile force required for the circular sample to detach from the stainless steel test plate and the mode of sample failure