-
E-mail
fbtc@fbtc.com.cn
- Phone
-
Address
Building 56, Juyuanzhou Industrial Park, No. 618 Jinshan Avenue, Fuzhou City, Fujian Province
Product Categories
Fuzhou Fuguang Baite Automation Equipment Co., Ltd
FB0803 diffusion silicon pressure transmitter
NegotiableUpdate on 04/28
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
FB0803 diffusion silicon pressure transmitter
Product Details
● FB0803Industrial diffusion silicon pressure transmitter
|
■ Industrial site process pressure detection and control ■ Ships and Navigation Systems ■ Aircraft and aviation systems |
■ Air separation equipment and thermal and hydroelectric units ■ Gas and oil pipelines ■ Boiler pipeline pressure control |
● FB0803XCompact diffusion silicon pressure transmitter
|
■ Hydraulic and pneumatic control system ■ Industrial process detection and control ■ Laboratory pressure calibration ■ Engine, internal combustion engine |
■ Locomotive braking system ■ Refrigerator, air conditioner ■ Thermal power unit ■ Compressor, gas dispenser |
● FB0803ZSanitary diffusion silicon pressure transmitter(No pressure inlet, no cavity, flat membrane structure, anti scaling)
|
■ food ■ medicine |
■ hygiene ■ make wine |
※ Stable output with high sensitivity
The output of a typical strain gauge sensor is only10mvLeft and right, while the full range output of the diffusion silicon sensor is100mvThe influence of factors such as left and right, interference, and noise is relatively small, and the resolution is greatly improved,There is no dead zone near zero pressure.
※ High precision and good repeatability
The diffusion silicon piezoresistive pressure sensor realizes pressure sensing, pressure transmission, and electrical conversion on the same component, without intermediate conversion links, pressure hysteresis, or mechanical displacement deformation, ensuring minimal repeatability and hysteresis errors, with good linearity, stability, reliability, and long service life.
※ Good temperature characteristics
Due to the use of advanced technologies such as laser resistance adjustment and computer compensation, as well as clever control of diffusion concentration, full range temperature drift (sensitivity temperature coefficient) self compensation is achieved. Overcoming the defect of high temperature coefficient in semiconductor chips, the zero position and full temperature drift of the transmitter have reached a high level, expanding the operating temperature range.
※ Suitable for applications in hazardous and explosive fields and locations
The diffusion silicon pressure transmitter has the characteristics of low current, low voltage, and low power consumption, and belongs to the intrinsic safety explosion-proof product. It has obtained the explosion-proof certificate issued by the national safety explosion-proof organization.
※ High reliability and anti-interference performance
The product is made of stainless steel material and has a special protective structure. The circuit is designed with a series of protection measures such as lightning protection, anti-interference, overvoltage, and overcurrent, which improves the ability to seal and resist corrosion and harsh working environments. It is fully suitable for the needs of general industrial field measurement and control.
※ TECHNICAL INDEX
● using objects |
Liquid, gas or vapor |
● measuring range |
Gauge pressure:0～10kPa～60MPa， Absolute pressure: 0～100kPa～10MPa Negative pressure:-0.1MPa～2MPa |
● transport go out |
4～20mADC |
● electricity source |
12～30VDC |
● load characteristics |
4～20mADCTwo line system loadR≤50(V-12)Ω |
● temperature range |
ambient temperature -20℃～+70℃;Standard medium temperature -20℃～+80℃ |
● Shell protection |
be better thanIP65 |
● Explosion proof type |
Intrinsically safe typeExiaⅡCT6 GaShould be equipped with external safety barriers;Explosion proof typeExdⅡCT6 Gb |
※ performance index
● comprehensive accuracy |
Accuracy level:±0.1%、±0.25%、±0.5% |
● stability |
be better than±0.1%FS/year |
● Temperature influence |
exist -20℃～+70℃Within the range, the change is less than±0.18% /10℃ |
● vibration effect |
The vibration frequency in any direction is20～200HzWhen the change is less than±0.02% FS |
● impact |
Any direction100Gimpact11msAfterwards, the change amount is less than±0.02% FS |
● Load impact |
As long as the terminal voltage of the input transmitter is higher than12VThere will be no load impact |
● position effect |
The installation position does not affect the zero point |
※ structure indicator
● Structural materials |
Shell:Polyurethane baked paint low copper cast aluminum alloy The contact medium material is related to the type of sensor selected and the sealing method used “O”Ring sealing structure: Fluororubber |
● Process connection |
Standard provisionM20×1.5External thread |
● Electrical connection |
Can be led out from any outlet as needed, suitable for cable diameters inφ8.5～φ10.0Industrial cables are used as leads for sealing purposes.Universal cable connectors can be selected for the lead out jointPG16perhapsM20×1.5Seal the non lead end with an end cap |
Similar Product Recommend
