FAGOR Fagor CNC System | CNC 8035-M/T/TC

FAGOR Fagor CNC System | CNC 8035-M/T/TCMachine tool control systemApplied to machine tools such as lathes, milling machines, punch presses, and laser cutting machines. Provide CNC 8035M controller, Fagor 8035M CNC system, CNC8035M Spain CNC8035T Fagor CNC8035-T-COL-2 lathe system, CNC8035-M-COL-2 milling machine controller, and provide CNC 8035 CNC system model specifications, prices, fault detection, maintenance, and technical solutions.

FAGOR Fagor CNC System | CNC 8035-M/T/TCTechnical parameters of machine tool control system：

The technical parameters of FAGOR CNC 8035-M numerical control system are as follows:

Hardware and Configuration‌

• ‌axle count: Multi controllable3-axis(Supports M-MON, M-MON-R, M-COL, M-COL-RT-MONT-COL and other configurations)

• ‌spindle control: Supports spindle speed (S code), direction control (M03/M04/M05), spindle positioning (M19), spindle shifting (M41-M44)

• ‌display: MatchingColor LCD displaySome models are7.5 inchesOr15 inch touch screen‌ ‌‌

• ‌memory‌：‌RAM 256KB‌ ‌‌

• ‌Storage ExpansionSupports CompactFlash (KeyCF), hard drive (optional), USB interface (some models)

• ‌communication interface‌：

• MatchingRS-232 serial cable, used for DNC communication

• Partial model supportCAN bus‌ ‌‌

• ‌Input‌：

• ‌40 point digital input/24 point digital output‌ （40I/24O） ‌‌

• Support5V or 24V probe input‌ ‌‌

• ‌feedback signal: SupportTTL/1VppType of shaft and spindle encoder feedback

‌Performance and Functionality‌

• ‌PLC performanceThe PLC cycle time is3ms/1000 instructions‌ ‌‌

• ‌software versionVersion:V11.1x‌ ‌‌

• ‌Programming support‌：

• SupportISO code programming(G/M code)

• ProvideGraphical ProgrammingAndInteractive operation mode(No need to manually write ISO code)

• ‌Fixed cycleSupport multiple fixed cycles such as drilling, tapping, boring, and cavity machining (such as G81-G89)

• ‌tool management: MatchingTool radius compensationTheKnife storage managementTheRigid tapping‌ ‌‌

• ‌DNC functionSupport DNC processing through RS-232 or external devices

‌Power and environmental requirements‌

• ‌power supply voltage‌：DC 24V

• ‌Operating Temperature‌：‌0 ° C to 45 ° C‌ ‌‌

• ‌relative humidity‌：‌≤85%(No condensation)

• ‌Protection levelSome monitor models areIP24(Panel Protection)

• 
  

‌

FAGOR CNC 8035-TNumerical Control SystemIt is used forTurning latheThe characteristic of the CNC system is its support for "no programming mode", which is suitable for small batch and multi variety processing scenarios. The following are technical parameters:

• ‌number of controlled axes: Controllable2 axes(Usually X and Z axes)

• ‌spindle controlSupport spindle control and handwheel operation

• ‌monitor‌：‌7.5-inch color LCD screen‌

• ‌Storage and Interface‌：

• Equipped with128MB flash memory card‌

• ProvideUSB port‌

• ‌Programming method‌：

• SupportInteractive Graphic Programming(No need to manually write ISO code)

• Simultaneously retainISO programming mode(G/M code) for user use

• ‌structural design‌：‌Integrated structure(Display+operation panel+central unit)

• ‌Applicable scenarios: Suitable forSmall businesses, individual processing points, tool workshops, repair workshopsWaiting for small-scale production environments

• ‌control accuracy: achievable0.001mmControl accuracy

‌main advantages‌

• ‌Easy to operateNo programming knowledge is required to complete the machining of ordinary parts

• ‌Shorten the preparation periodReduce programming time through graphical interaction

Note: Models such as "8035-T", "8035T", and "8035 TC system series" are suitable for turning purposes.

CNC 8035-M/CNC 8035-T/CNC 8035-TC/‌CNC 8035-M-COL-R-2‌Maintenance content for faults in the Fage CNC system：

CNC 8035-M is a common model used for controlling CNC machine tools in the FAGOR Fagor CNC systemFault repair content:

• ‌Black screen/No display/Flower screen/White screen‌

• LCD screen damage, high voltage board malfunction, abnormal power module, motherboard signal driver chip issue.

• ‌Unable to start/not start/stuck in the Logo interface‌

• CF card damage, 24V power fluctuation, memory gold finger oxidation, BIOS configuration error.

• ‌Button unresponsive/touch screen malfunction‌

• Aging of touch screen film, loose button wiring, and malfunction of human-machine interface (HMI) motherboard.

• ‌No output signal (motor/actuator not functioning)‌

• Loose or damaged output circuit, incorrect parameter settings, missing control program logic, control motherboard or chip malfunction.

• ‌Alarm at high speed (such as "following error exceeds limit")‌

• Encoder/grating ruler contamination or poor connection, parameter incorrect setting (such as MD30200 being reset), poor grounding or grid interference.

• ‌Abnormal spindle speed+E-15/E-22 alarm‌

• Poor encoder contact, PID parameter mismatch, interference between power and signal lines, cooling system failure.

• ‌Communication errors (such as 4028 alarm, RS232 error)‌

• RS232 interface, I/O circuit or communication module hardware failure.

• ‌The power indicator light is not on/the system is unresponsive‌

• Abnormal input voltage, blown fuse, breakdown of varistor, malfunction of switch power module.

• ‌Handheld box malfunction (button failure, communication interruption)‌

• Aging of key film, damaged connecting wires, incorrect communication parameters, abnormal power supply to the main control board.