FA01A Analog Amplifier

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Features of amplifier products: l Connect the wires according to the wiring requirements l Connect the transmitter with the specified size of DC power supply, l Connect the sensor, and adjust it to the corresponding zero output value (for example, 0~10v output is adjusted to 0.000v) through the zero adjustment potentiometer when the no-load is installed. l After adjusting the zero point, load the sensor (preferably the larger value of the range), and then adjust the gain potentiometer to the corresponding value (for example, 0~10v input is adjusted to 10.000v). You can also adjust it to any value as required

Product Details

放大器生产厂家

amplifierProduct Features:

Connect the wires according to the wiring requirements

Give it to metransmitterConnect the specified size DC power supply,

Connect itsensorAfter installing the no-load condition, adjust it to the corresponding zero output value through the zero point adjustment potentiometer (for example, 0~10v output is adjusted to 0.000v)

L After adjusting the zero point, load the sensor (preferably the larger value of the range), and then adjust the gain potentiometer to the corresponding value (for example, 0~10v input is adjusted to 10.000v), or adjust it to any value as required.

After adjusting the parameters (preferably repeating the calibration 2-3 times) and confirming, disconnect the power supply ..