Explosion proof static eliminator BXCQ-RS

Explosion proof static eliminator BXCQ-RSSuitable for automatic filling control systems that require separate use of electrostatic grounding protection, such as liquefied gas loading and unloading, railway piers, and other places; The electrostatic grounding controller can not only guide the static electricity generated during liquid transportation to the ground, but also automatically detect the grounding status throughout the process. When the circuit is disconnected (with a detection resistance value greater than 60 Ω), an audible alarm will be triggered, and a switch signal will be output to interlock with third-party equipment for effective connection between the oil tanker and the grounding pile, ensuring reliable discharge of static electricity.

BXCQ-RS explosion-proof static eliminator parameters:

1. Working voltage: 24VDC~220VDC

2. Explosion proof grade: ExiaIIBT6

3. Working current: ＜ 60mA

4. Grounding resistance alarm value:<60 Ω

5. Response time:<2 seconds

6. Alarm method: Sound and light alarm

7. Temperature range: -40 ℃ to+60 ℃

8. Pressure range: 80Kpa to 110Kpa

9. Output signal: 10A, 30VDC or 10A, 250VAC

Explosion proof static eliminator BXCQ-RSDesign standards (referring to national standards):

1. GB50156-2012 "Design and Construction Specification for Automobile Gas Filling Stations I"

Article 11.2.11 stipulates that the unloading sites of gasoline tankers, LNG tankers, and LNG tankers at refueling stations, as well as the unloading sites of on-board gas storage cylinder groups at CNG refueling substations, shall be equipped with anti-static grounding devices for unloading or gas discharge, and shall be equipped with electrostatic grounding devices capable of detecting jumper wires and monitoring the status of grounding devices.

Article 11.2.15 stipulates that the grounding resistance of the anti-static grounding device should not exceed 100 Ω.

2. GB50074-2002 "Design Code for Petroleum Storage"

Article 14.3.11 stipulates that anti-static grounding devices used for cross connections in oil loading and unloading areas should use anti-static grounding instruments that can detect grounding conditions.

Article 14.3.15 stipulates that the grounding resistance of the anti-static grounding device should not exceed 100 ohms.