Explosion proof pressure transmitter ONE X series

Product Introduction

The explosion-proof pressure transmitter ONE X series of UE pressure transmitters in the United States can directly respond to emergency shutdown in less than 100 milliseconds, making it the preferred choice for positive displacement pump applications. The ONE X series explosion-proof pressure transmitter is equipped with a programmable set point and dead zone high-capacity safety relay output (SRO), which can directly and quickly handle high currents and voltages to start control valves or shut down compressors, which cannot be achieved by a single transmitter.

Technical Parameter

Accuracy: At room temperature, the error is 0.5%

Repeatability: 0.1%

Stability: ± 0.25% Full Scale Access/Annual Maximum

Operating temperature: -12 ℃ .. 70℃

Sensor: 316 stainless steel welded diaphragm, 1/2 "NPT internal thread interface

Switch response time: ≤ 100ms

Display reaction time: 400ms (2.5Hz)

Reaction time delay: Between 250ms and 2s, the software is configured with a 2x speed increase.

Setpoint&Dead Zone: User set, 100% full-scale adjustable, no 0 dead zone set

Control mode: The output status can be changed on-site, or the set value for rising or falling can be adjusted.

Automatic or manual reset can be set.

Shell: 4X/IP66360 alloy polyester coated aluminum

Electrical interface: 3/4 "NPT internal thread cast aluminum interface

Weight: 2-2.7kg