Explosion proof pilot molecular distillation equipment

NegotiableUpdate on 07/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Explosion proof pilot molecular distillation equipment with an evaporation area of 0.4 square meters and a processing capacity of 10-40 kilograms per hour. It can operate continuously for 24 hours and has a daily output of up to tons. The electrical explosion-proof design has an explosion-proof rating of ExDIIBT4 and can be operated in Class A workshops. It is equipped with an explosion-proof PLC touch screen to achieve automatic control and modular supply

Product Details

Explosion proof pilot molecular distillation equipmentparameter

Device name	short-range/Molecular Distillation Pilot Plant
model	VK 200 - 40explosion-prooftype
Evaporator material	1.4571（316Ti）
Evaporation area	0.4m²
Scope of Material Processing	At room temperature, it is a liquid material until the melting point range180℃The following materials
Feed quantity	10-40 kg/h (Depending on the nature of the material)
Maximum heating temperature of evaporator	300℃ Optional highest350℃heating device
Operating pressure(When the equipment is unloaded)	0.001mbar
Feed form	Feed gear pump
Discharge form	One discharge gear pump for each light and heavy component
Inlet and outlet forms of evaporator	flanged

a setExplosion proof pilot molecular distillation equipmentVK 200 - 40

The evaporator rotor motor, gear pump motor, and vacuum pump motor are all designed to be explosion-proof, ExDIIBT4

The heater and refrigerator are both designed to be explosion-proof

All instruments are designed to be explosion-proof, including vacuum gauges, mass flow meters, etc

Explosion proof electrical switchgear with explosion-proof PLC touch screen

VTAProvide a pry mounted turnkey device, the equipment isVTAAfter assembly and testing in the factory, the equipment will be sent to the customer's site as a whole. The customer only needs to connect the power supply and basic utilities to start production work. Greatly saving installation and debugging time on site.

Continuous operation processing, with an hourly processing capacity of approximately10-40Kilogram per hour(Depends on material properties and product process)It can handle materials ranging from several hundred kilograms to tons per day.

Due to the adoption ofVTAHigh precision feed and discharge gear pumps allow for direct discharge under high vacuum without the need for any buffer tanks, and can accurately calculate the distillation ratio of light and heavy components.

All parts in contact with the material are designed to be heatable, with no heating dead corners, and can handle melting points up to180℃The material can also handle light components with melting points up to140℃The working conditions are such that the discharge area for light components is also insulated and heated.

There are two forms of scraper rotors to choose from,WRSRoller type processing of materials with low viscosity,SKRThe elastic scraper rotor can handle materials with high viscosity because the elastic metal sheet exerts a loading force on the scraper, and using the scraper can produce very good film scraping and turbulence effects on the liquid film.VTAMore than80%The pilot equipment is equipped withSKRThe elastic scraper type film scraping rotor utilizes its excellent evaporation efficiency. The scraper material has been approvedFDACertification can be used in the production of pharmaceutical products.