Environmental Certification Smoke Humidity Meter Moisture Meter

Environmental Certification Smoke Humidity Meter Moisture Meter

Technical Specifications:

lMeasuring principle：RC (Resistor-Capacitor)law

ldisplay mode：4Digital display

lmeasurement range：0 ~40% VOL

ldivide distinguish rate：0.1%

lmeasurement accuracy：＜±2%FS

lheavy again sex：＜±1%

lresponse time：T₉₀＜20S

lOperating Temperature：meter:-10 ~ +50℃, probe rod0 ~170℃

lHeat tracing type：electric heat tracing(Optional)，Heat tracing temperature：50℃ ~150℃

lsampling method：plug-in

lanalog output:4-20mA. DC(Isolation output, load)Resistance less than500Ohm)

2Programmable dry contact type passive alarm outputContact Z has a large capacity220VAC/2A

lother interfaces：RS232

lpower supply：AC220V±10% 50/60Hz、power consumption＜15VA

lprevent protect sex：The probe is316F、 The protection level of the instrument box isIP65

lservice life：instrument＞36Months, sensors＞24Months (under normal usage conditions)

lSample gas components：No flammable gases, no highly corrosive gases, and less than dust content1mg/Nm³

lprobe length：routine0.5mThe1.0mThe1.5m，Other lengths can be customized（＜1.8m）

lInstallation method：plug-inTheDN65standard flange

Environmental Certification Smoke Humidity Meter Moisture Meter

Instrument features:

lIntegrated design, easy installation,Reduce the impact of external interference on measurement values；

lHigh precision temperature automatic compensation eliminates the influence of environmental temperature;

l DTThe heat tracing design effectively prevents sulfide solidification;

lProbe rod316Material with strong corrosion resistance;

lInstrument shell protectionIP65Grade;

l YZJKSensor chips can effectively ensure instrument accuracy and service life;

lAdditional functions can be added to accurately measure high temperature dew point values;

lTwo stage dust filtration design, effectively filtering dust and acidic liquids;

lEasy to operate, long service life, and easy to maintain.

lJ can provide two display results for humidity or relative humidity; （Please provide an explanation when placing an order）

Application scenarios:

Widely used in online continuous monitoring system for flue gasCEMSThe measurement of humidity in flue gas from desulfurization and denitrification can also be applied to humidity control in wood, building materials, papermaking, chemical, pharmaceutical, fiber, textile, tobacco, vegetable, and food processing.

Note:If you encounter a low temperature, high humidity, and high dust environment, our company will provide you with a reasonable solution for smoke humidity.

Ordering Instructions(Please specify when placing an order)

lProbe length (conventional)1Rice)

lEnvironmental temperature for use

lBackground gas composition