Enpat aluminum scrap centrifuge solves water and oil pollution in aluminum scrap

Disclaimer: The prices marked on the entire website of Enpat Company are all prepaid amounts, and the specific prices are subject to the contract agreement.

Enpat aluminum scrap centrifuge solves water and oil pollution in aluminum scrap Enpat aluminum scrap centrifuge solves water and oil pollution in aluminum scrap

Main application areas:Automobile manufacturing and parts, railway machinery, molds, valves, aluminum products, electronics, aluminum profiles, and other manufacturing industries.

Product Introduction:The Enpat ED series degreaser is a high-capacity automated degreaser suitable for processing various metal chips. When the equipment is in operation, the material is subjected to centrifugal force, and the oil is separated from the metal chips and thrown out through a sieve basket. The separated oil enters the collection channel and is then centrally discharged at the oil outlet; The dried material is continuously pushed out by the discharge tray and discharged directly below the equipment. This equipment adopts PLC and touch screen control, which can effectively control the spin drying time, with high efficiency and oil yield. The dryness of the oil in the material after spin drying can reach over 97%.

Enpat lathe scrap copper chip degreasing machine scrap copper chip aluminum chip degreasing machine PLC control saves manual degreasing,Enpat degreaser is suitable for drying and degreasing various metal cutting chips such as iron chips, aluminum chips, copper chips, etc. generated in the production process of automotive manufacturing and parts, railway machinery, molds, valves, aluminum products, electronics, aluminum profiles, etc.

Equipment operation mode:The motor drives the spin dryer to rotate at high speed through a belt, and the oil attached to the metal shavings is separated from the metal shavings by centrifugal force and falls into the oil chamber, and is discharged from the oil outlet outside the equipment. The metal shavings are tightly attached to the inner wall of the oil removal sieve basket under the action of centrifugal force, and move upward under the push of the hydraulic driven discharge tray. Through continuous reciprocating motion, the metal shavings are slowly pushed out and slid along the main material dropping channel to the bottom discharge port for discharge.

Product Features:

Efficient oil removal rate of up to 95%, improving the purity of metal shavings.
Simple operation, automatic discharge, automatic oil removal and dehydration.

Enpat Iron Scrap Oil Removal Machine Automatic Oil Removal Equipment