Enpai Scrap Aluminum Edge Material Pressing Machine Scrap Metal Packaging Machine

Disclaimer: The prices marked on the entire website of Enpat Company are all prepaid amounts, and the specific prices are subject to the contract agreement.

Enpai Scrap Aluminum Edge Material Pressing Machine Scrap Metal Packaging Machine Enpai Scrap Aluminum Edge Material Pressing Machine Scrap Metal Packaging Machine

Product brand:Enpat

Product Introduction:Enpat has been developing and producing a fully automatic metal chip pressing system since 1956. This system is mainly used to press and recycle various metal chips such as iron chips, aluminum chips, copper chips, etc. cut from machine tools. The entire production process adopts fully automated disposal technology, which can directly press and shape the metal chips into cakes. At the same time, the cutting oil can be separated from the cakes, and the cutting oil can be recycled and reused, ensuring that the original material of the cakes is not contaminated and solving the problem of metal chips having nowhere to be stacked.

Product application:The machining metal chip processing solution is mainly used for general purposesEquipment manufacturing industry、Automotive parts manufacturing industry、Metal products industry, etc. Industry outputwasteiron filings、aluminum chipsCopper shavingsSteel shavingsStainless steel shavings, alloy shavingsWaiting for the pressure block oil recovery treatment of metal shavings, various styles of metal shavings（Like filamentous, clustered, or flaky）All can truly achieve the recycling and reuse of metal resources through the processing of this system.

Enpat has been developing and producing a fully automatic metal chip pressing system since 1956. This system is mainly used to press and recycle various metal chips such as iron chips, aluminum chips, copper chips, etc. cut from machine tools. The entire production process adopts fully automated disposal technology, which can directly press and shape the metal chips into cakes. At the same time, the cutting oil can be separated from the cakes, and the cutting oil can be recycled and reused, ensuring that the original material of the cakes is not contaminated and solving the problem of metal chips having nowhere to be stacked. In machining production engineering, a large amount of output is generated, accounting for about 20% of metal castings and up to about 30%. Metal shavings have a pure composition and a much higher content than any other mineral. They can generally only be treated as waste and have great recycling value. Especially for various alloy casting enterprises, the self recycling and utilization of metal shavings has greater significance.

【Frequently Asked Questions】

（1）operationMany customers do not know how to operate it, and can demonstrate it to them by recording a short video of the operation, which is simple and convenient

（2）priceBased on the region and country, recommend machine models and configurations to customers according to their capabilities

（3）Where are the devices sold toAustralia, Europe, Southeast Asia, Middle East, South Africa, domestic, customers all use it very well

（4）warranty period: 12 months

（5）delivery period: In stock, or 20 days

（6）packing: Less than Container Load (LCL)

（7）How long can the device work continuouslyOur clients usually work for 4 hours, rest for 1 hour, and then try again

Manufacturing of hardware products - Particle shaped aluminum cutting and pressing machine Manufacturing of hardware products - Particle shaped aluminum cutting and pressing machine