Emergency escape breathing apparatus box EEBD storage box made of stainless steel 304

Dimensions: External dimensions 610mm × 240mm × 210mm, internal space suitable for 10-15 minutes standard EEBD (most 3L cylinder models can be stably installed); Thickened stainless steel plate (commonly 2.0-3.0mm) has stronger impact resistance and corrosion resistance than ordinary thin boxes
Material: The mainstream is 304 stainless steel (weather resistant, rust proof), and 316 stainless steel can be selected for marine/chemical environments; The surface is mostly brushed, anti fingerprint, and easy to clean
Structural configuration
Wall mounted design with pre embedded installation holes, which can be quickly fixed at the entrance of the engine room, corridor, and enclosed space;
Equipped with quick opening lock/pin, it can be opened immediately in case of emergency, and it is strictly prohibited to add deadlocks (in accordance with SOLAS/IMO requirements);
Sealing strip, dustproof and moisture-proof; Partial transparent observation window, allowing direct viewing of EEBD pressure gauge without opening the box;
The box is prominently marked with EEBD red/white markings, in compliance with international maritime safety standards;
Customizable nameplates, numbers, and anti-corrosion coatings.
Applicable standards: Meet SOLAS, IMO, FSS Code requirements, suitable for places such as ships, petrochemicals, mines, tunnels, etc.

Features and advantages
Protect EEBD from mechanical collision, dust, and oil contamination, and extend equipment lifespan;
Fixed location, clear identification, easy to find in case of emergency evacuation;
Stainless steel material is heat-resistant, corrosion-resistant, and suitable for harsh working conditions;
Daily inspection is convenient, and the observation window can directly check the pressure of the gas cylinder.
Key points for selection and installation
Confirm the EEBD size (length x width x thickness) to avoid the box being too small;
Environment determines material: coastal/offshore priority 316 stainless steel;
The installation height is about 1.5m, with no obstacles or obstructions, and there are obvious reflective/fluorescent signs;
It is strictly prohibited to lock and prevent quick access. Anti misoperation locking pins can be used instead;
Regularly clean the box and check the aging condition of the sealing strip

610 × 240 × 210mm thick stainless steel EEBD storage box (usually labeled 61 × 24 × 21, unit: cm), it is a specialized protective box for storing emergency escape respirators (EEBD) in marine/industrial environments.

Which material to choose
Indoor and ordinary cabin choose 304 stainless steel (high cost-effectiveness)
316 stainless steel (with stronger rust resistance) must be used in offshore, salt spray environments, and outdoor decks
How to choose thickness
Regular thin version: 0.6~1.0mm cheap, easy to deform, not recommended
Standard thickening: 1.2-1.5mm commonly used for marine use, sturdy and durable
Heavy duty thickening: collision prone and explosion-proof areas above 2.0mm
Simple note: Starting from at least 1.2mm for ship/industrial use.
EEBD is a life-saving device, and the box cannot be difficult to open. Qualified boxes should have:
No lock/simple pin
Cannot use key lock or password lock. In case of emergency, the door must be opened in one second
With sealing tape
Dust proof, waterproof, oil proof, protect the respirator
Optional observation window
You can check the pressure gauge without opening the box, which is convenient for inspection
Featuring a prominent EEBD logo
Red/fluorescent stickers, can also be found at night
Wall mounted holes are complete for easy fixation
Select styles based on usage environment
Ship engine room, corridor
304/316 stainless steel, thickened, wall mounted
Deck, outdoor, high salt spray
Must be 316, with waterproof adhesive strip
Chemical industry, mining, tunnel
Thickened stainless steel, impact resistant
Indoor computer room, ordinary place
304 stainless steel is sufficient, economical and practical
The device is a regular EEBD with dimensions of 61 × 24 × 21cm
On board/salt spray environment 316 stainless steel
304 stainless steel for ordinary indoor environment
Want to be durable without deformation, with a thickness of ≥ 1.2mm
Must be easy to open, sealed, and labeled with EEBD

The most common external dimensions are 61 × 24 × 21 cm (610 × 240 × 210mm), but the size of EEBD varies among different brands, so it is important to verify:
Measure your emergency escape breathing apparatus
Length (including gas cylinder and face mask bag)
width
thickness
The net size inside the box should be 2-5cm larger than the equipment
Otherwise, it won't fit in, the door won't close, or the face mask will be squeezed.
Common adaptations:
10 minutes/15 minutes standard EEBD 61 × 24 × 21 basic universal
Choose a larger EEBD size of around 70 × 30 × 25