Electric roller press (heating type)

BD-GY01 Laboratory Electric Roller Press

• Overview:

This model of roller press is used for small lithium electrode sheets,Electric rolling of small amounts of precious metal materials such as gold and silver, and non-ferrous materials such as copper and aluminum. Especially suitable for thinning and increasing density of clean energy material lithium battery plates. This machine adopts gear transmission to achieve roll pressing, and the rolling thickness can be adjusted. It is easy to use and can intuitively control the material pressing thickness with a dial gauge.

2、 Working principle：

This equipment is driven by a reduction motor to produce high hardness pressure rollers. The gap between the rollers is mechanically adjusted to form the pole pieces under pressure, thereby increasing the density of the pole pieces.

3、 Technical parameters:

1. Roller size: Φ 100mm×100mm；

2. Pressure rollernoodlesHardness: HRC62;Imported steel roller material9CR2MO

3. Cylindricity of rolling mill：≤±0.002mm；

4. Effective gap: 0-3Mm adjustable;

5 Working speed: continuously variable transmission,linear velocity08.5Meter/minute adjustable;

6Roller surface smoothness:Plated with hard chrome * rusting.

7Working width: the largest100mm；

8. Roller surface quenching depth: 5mm;

9. Maximum pressure: 5T;

10. Working power:300WTemperature~130 ℃

11Voltage:AC220V 。

12The reducer motor adopts the joint venture brand motor of Yutian (Japan).

11Overall dimensions:560mm(long)×320mm(wide)× 320mm(tall)；