Electric pole load deflection tester (wired version)

1. Load measurement: 20 KN, 200KN for internal force testing.

The minimum displayed reading for readings less than 100KN is 0.01KN

>100KN reading with a minimum display of 0.1KN)

2. Deflection measurement: displacement measurement within 1800 mm.

(Minimum display unit 0.1 mm)

3. Displacement A measurement: Displacement measurement within 50mm.

(Minimum display unit 0.01 mm)

4. Displacement B measurement: Displacement measurement within 50mm.

(Minimum display unit 0.01 mm)

5. Display light source: constantly on

6. Measurement accuracy ≤ 1% Reading ± 1 word

7. Display zeroing and automatic zeroing

8. 999 data storage records

9. Battery voltage DC12V

The normal usage time of 10 instruments is approximately 46 hours

11. Operating environment -5 ℃~+45 ℃, 80% (relative humidity)

The charging time is approximately 5 hours

Electric pole load deflection tester (wired version)configuration

One display instrument

One 20 KN and one 200 KN tension sensor each

One 1800mm deflection sensor (with base)

One 50mm displacement variable sensor (with base)

One 50mm displacement variable sensor (with base)

Supporting lifting ring, 10 meter shielded wire, power cord, instruction manual, certificate of conformity, warranty card

Storage and maintenance

1. The digital load displacement tester is a precision electronic instrument. Before use, it is necessary to have a thorough understanding of the instrument and be familiar with the testing methods.

When the instrument is not in use, the sensor should be removed and packed together with other accessories in the packaging box.

3. The packaging box should be placed in a dry and oil-free place.

4. This instrument should be handled gently Handle with care Prevent strong vibrations.

5. This instrument must not be opened by itself to avoid affecting the testing accuracy.

When users discover a malfunction in the display instrument, they can request to send it to a designated repair station or manufacturing unit for repair.

7. This instrument is calibrated once a year and can be sent to the metrology department or manufacturing unit for calibration.

Electric pole load deflection tester (wired version)Meet the mechanical testing requirements for circular cement products (GB4623-2014).