Electric motor rotor die-casting machine ZJ-160T

Product Introduction:ZJ-100/315Special die-casting machine for ton vertical motor rotor, capable of die-castingYseries160The above motor rotors are the most ideal die-casting equipment for motor rotors in various motor production units; It can also be used for other aluminum and zinc castings with die-casting center gates The machine structure consists of a machine base, a mold clamping part, an injection part, an auxiliary machine (pushing mold) part, a hydraulic control part, electrical and other parts The mold clamping part adopts hydraulic automatic locking, and its motion characteristics meet the requirements of the die-casting process, with smooth motion and reliable mold locking The injection system has high pressure and fast injection speed; And it has the characteristic of stepless speed regulation according to process requirements; Adopting a two-stage injection process, with a first stage slow and a second stage fast injection process, the highest fast injection speed can reach5rice/Seconds, its movements are reliable and sensitive The auxiliary machine (pushing mold, cutting) device can reduce the labor intensity of workers and achieve automatic entry and exit of molds and automatic cutting of gates; The electrical part of the machine adopts low-voltage DC24VDirect point contact, simple structure, easy to repair The above system has the advantages of safety interlock devices, safety doors at the fast injection part of the host, safe, reliable, convenient, quality assurance, and long service life in the setting between work sequences This machineYE-40The blade pump is used separately for fast injection of energy storage devicesYE-63Blade pump (plunger pump) oil supply,The manual directional valve (or electrical automatic) controls the opening, closing, slow injection, slow injection return, cutting cylinder and other work accumulator pressure10MPa, byHY-Hb20Unloading overflow control Quick injection by24BYO-H32B-TElectro hydraulic directional control The maximum pressure of the nitrogen cylinder is maintained without oil pressure70-80MPaRecommend using products made in Shanghai46-68The anti friction hydraulic oil has a normal working oil temperature of50℃Left and right, generally not exceeding70℃The fuel tank must be cleaned thoroughly and filled with hydraulic oil85～90％(When the machine is working normally, it shall prevail).