Electric hydraulic servo pressure testing machine YAW-5000

The YAW-5000 electro-hydraulic servo pressure testing machine is mainly used for pressure testing of large structural components, and can be used for compressive strength testing of cement and large volume concrete, as well as compression testing of metals.

The YAW-5000 electro-hydraulic servo pressure testing machine consists of a base, crossbeam, four columns, feeding trolley, transmission device, etc. The frame has high rigidity and strength, small deformation, and meets the requirements of testing and inspection. The crossbeam is driven by a motor, and the testing space is infinitely adjustable, making it convenient for testing needs at different heights. The feeding trolley adopts manual mode, with the oil cylinder placed above the base. The trolley is manually pushed into the testing space, and the piston lifts the trolley to complete the test, saving time, effort, and convenience.

1. Maximum bearing capacity: 5000kN;

2. Experimental adjustment space: 0-1500mm, the distance between the upper pressure plate liner and the lower pressure plate liner;

3. Maximum experimental space: 1500mm（customizable）；

4. The clear spacing between the four columns of the testing machine is 750mm × 450mm;

5. Dimensions of the lower pressure plate (all effective compression area): 600mm × 600mm × 80mm;

6. Beam lifting speed: 180mm/min;

7. The lifting of the crossbeam is driven by a motor and can achieve point-to-point and linkage control modes;

8. Whole machine weight: 6 tons;

9. Whole machine footprint: 3000mm × 3000mm;

For detailed technical parameters and quotations, please consult the Customized Product Technology Department: