Electric hot air drying oven manufacturer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The DGF series electric blast drying oven manufacturer's products are suitable for research and production units such as electricians, electronics, instruments, materials, and pharmaceuticals. They are mainly used for drying, baking, heat treatment, disinfection, insulation, and other tests of items.

Product Details

　　DGF series electric blast drying oven manufacturerProduct Parameters:

Model: DGF3006B, DGT3006B

Studio capacity: 640 (L)

Studio size: 80 × 80 × 100 (cm)

Dimensions: 107 × 130 × 128 (cm)

Temperature range: R.T 20 ℃~300 ℃

Temperature fluctuation: ± 0.5 ℃

Temperature uniformity: ± 2.5%

Shell material: cold-rolled steel sheet

Inner liner material: ordinary type: cold-rolled thin steel plate B type: stainless steel plate

Thermal insulation material: glass wool

Controller: Computer temperature control instrument

Safety device: Overtemperature protection, DGT with pressure relief safety door

　　DGF series electric blast drying oven manufacturerProduct Features:

1. Complete variety and specifications to meet the needs of different customers;

2. Assemble the structure with blocks, spray paint the shell in trendy colors, and create an elegant and beautiful appearance;

3. Forced convection duct structure form;

4. PID regulation, digital display instrument;

5. Equipped with independent studio over temperature protection and short circuit protection;

6. DGF is a generally applicable drying oven.

7. The heating of DGT is a closed heating tube with an exhaust port and a pressure relief safety valve.

Electric hot blast drying ovenEquipment maintenance should also be done well in daily use:

Before use, pay attention to whether the voltage of the power supply used matches (whether it is grounded).

When powered on, never touch the electrical parts on the left side of the box with your hands or wipe them with a damp cloth or rinse them with water.

All power sources should be cut off during maintenance.

The power cord should not be wrapped around metal objects and should not be placed in high temperature or humid places.

Do not place too many items inside the box. A certain amount of space must be left to allow natural convection of air inside the box, and humid air can accelerate its escape on the top of the wind.

Regularly check whether the contacts of the temperature regulator are abnormal, and if so, promptly handle them to ensure good contact (note that the power must be cut off).

Do not put flammable materials in.

After each use, cut off the power supply.

Keep the inside and outside of the box clean and hang corresponding signs.