Electric diaphragm regulating valve

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Model and specification ZDSG type nominal diameter 15-100mm pressure range 1.0MPa suitable for corrosive media such as strong acids and alkalis

Product Details

main features

The ZDSG type straight stroke electric regulating diaphragm valve has a simple structure, low flow path resistance, larger flow force than other valves of the same diameter, no leakage, and can be used for regulating high viscosity and suspended particle fluids. Depending on the diaphragm material (rubber or polytetrafluoroethylene), it is suitable for regulating strong alkaline and highly corrosive media. This electric regulating valve is equipped with a diaphragm valve and PSL series

Composed of electric actuators. The electric actuator has a servo system inside, which does not require an additional amplifier. It can be controlled by an input control signal (4-20mA or 1-5VDC) and a single-phase power supply to adjust parameters such as pressure, flow rate, temperature, and liquid level.

Design features and execution standardsNominal diameter (mm)
15 20 25 32 40 50 65 80 100Flow coefficient Kv
8 12 16 28 60 68 90 160 3001.0
Nominal pressure MPaEquipped with actuator
PSL202 PSL 204 PSL 208 PSL 210Travel distance (mm)
10 16 25 401.0
Allowable pressure difference (MPa)actuator
PSL intelligent linear actuator and 3810 electric actuator, please refer to the corresponding actuator for detailed informationpower supply
220V±10%50Hzprotection grade
IP65 basic error: ± 1.0%dead zone

≤± 1.0% hysteresis: ≤± 1.0%

scope of application

Urban construction, chemical industry, metallurgy, petroleum, pharmaceuticals, food, beverage, environmental protection

Ordering Instructions
1. Product model and name
2. nominal diameter DN (mm)
3. Nominal pressure
4. Traffic characteristics
5. Valve body material
6. Rated flow coefficient
7. Type of medium and temperature range
8. Pressure difference before and after the valve
9. Power supply voltage and control signal