ETCR2000 series clamp grounding resistance tester

Product Overview

The ETCR2000 series clamp type grounding resistance tester is the excellent pursuit of technical quality by our company's technical research and development team. Through continuous innovation and improvement, it is a thorough upgrade of the old products. The advantages are reflected in:
The only clamp type grounding resistance meter with USB-RS232 interface, which enables data uploading to a computer, software monitoring, and dynamic display.
Breaking through the long self check wait during startup, immediately enter testing upon startup.
Breakthrough the self checking method of relays, eliminate relays, adopt the most advanced algorithms and digital integrated processing technology, and achieve complete intelligence.
Breaking through the bulky characteristics of the old product, it is more in line with the characteristics of handheld instruments.
Brand new exterior design, 6-key operation on the panel, direct performance.
Added sound and light alarm function, "beep beep beep beep" alarm sound.
Added interference signal recognition and indication functions, "beep beep beep beep beep" prompt sound, and Noise symbol flashing
Add storage data: 99 sets.
Wide resistance range: 0.01 Ω -1200 Ω
Higher resolution of leakage current detection: 0.05mA
Lower power consumption: maximum starting current does not exceed 50mA.
Faster testing speed: 0.5 seconds/time
Stronger anti-interference ability; Testing stability is higher.
The ETCR series clamp type grounding resistance meter is widely used for measuring grounding resistance and loop resistance in power, telecommunications, meteorology, oil fields, buildings, and industrial electrical equipment. When measuring a grounded system with a circuit, there is no need to disconnect the grounding lead or auxiliary electrodes, which is safe and fast. It can measure grounding faults that cannot be measured by traditional methods and can be applied to situations where traditional methods cannot measure them, because the ETCR series clamp type grounding resistance meter measures the comprehensive value of grounding body resistance and grounding lead resistance.
The ETCR series clamp type grounding resistance meter is divided into long clamp and round clamp, with the long clamp being particularly suitable for flat steel grounding applications. The C-type clamp type grounding resistance meter can also measure the leakage current and neutral line current of the grounding system.

Product Features

1. The ETCR2000 clamp type grounding resistance tester is suitable for grounding leads of various shapes (round steel, flat steel, and angle steel)
2. Non contact measurement of grounding resistance, safe and fast
3. No need to use auxiliary grounding rods, no need to interrupt the grounding of the tested equipment
4. Equipped with dual protection insulation
5. Strong anti-interference ability and high measurement accuracy
6. Using No. 5 alkaline battery is convenient for users

Product Parameters

Single jaw grounding resistance tester, clamp type grounding resistance tester, clamp type grounding resistance meter, grounding resistance, grounding surface, grounding resistance meter, grounding resistance meter, grounding resistance tester, clamp type digital grounding resistance tester, clamp type grounding resistance tester