- Phone
-
Address
No. 666 Jinfeng Road, Suzhou High tech Zone
Product Categories
Suzhou Boyuanhong Electronics Co., Ltd
ESD electrostatic wing gate prohibition system
NegotiableUpdate on 05/15
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ESD electrostatic wing gate access control system is a high-tech product mainly designed for intelligent management of personnel passages. It is an upgraded product of intelligent three roll gates and swing gates. The equipment controls and integrates mechanical, electronic, and microprocessor control with electronic ticket systems, access control attendance systems, parking lot systems, facial recognition systems, anti-static, fingerprint, palm print, iris and other biometric recognition systems
Product Details
ESD electrostatic wing gate prohibition system
1. Product Overview
Intelligent wing gate is a high-tech product mainly designed for intelligent management of personnel passages. It is an upgraded product of intelligent three roll gate and swing gate. The equipment integrates mechanical, electronic, and microprocessor control into electronic ticket system, access control attendance system, parking lot system, facial recognition system, anti-static, fingerprint, palm print, iris and other biometric recognition systems.
2. Product functional features
1) Equipped with fault self checking and alarm prompt functions, convenient for users to maintain and use;
2) Programmable device operation status through the built-in small press pad on the main control board;
3) Mechanical structure and induction dual anti pinch function. When the telescopic arm encounters resistance during reset, it automatically stops or the motor stops working within the default time. After a default delay, it resets again (until reset) with minimal force (≤ 2Kg);
4) Sound and light alarm function: including illegal intrusion and tailgating alarm;
5) The anti-collision function automatically locks the swing arm when no opening signal is received;
6) Telescopic arm synchronization function;
7) It has an automatic reset function. After the gate is opened, if the user does not pass within the specified time, the system will automatically cancel the user's permission to pass. The standard is to reset automatically within 5 seconds after opening;
8) After a power outage, the channel automatically opens and when powered on, it automatically closes; Low motor noise
9) Can be connected to various card reading devices and receive relay switch signals for operation;
10) Can control personnel entry and exit in one or both directions;
11) Remote control and management can be achieved directly through the management computer;
3. Technical parameters
◇ Chassis material: Domestic standard (304 grade) stainless steel
◇ Telescopic arm length: 285mm
◇ Large channel width: 600mm Standard: 550mm
◇ Drive motor: DC brushed motor 50W/24V
Normal service life: 5 million cycles
◇ Working voltage: AC220 ± 10% V/50 ± 10% HZ
◇ Temperature: -10 ℃ -50 ℃ Relative humidity: ≤ 90%, no condensation
◇ Working environment: indoor, outdoor (shade shed)
Traffic speed: 45 people/minute (normally open), 30-40 people/minute (normally closed)
◇ Gate opening and closing time: 1 second
◇ Time required to enter traffic mode after power on: 3 seconds
◇ Automatic reset time after malfunction: 10 seconds
Communication interface: RS485 standard, communication distance: 1200 meters
◇ Input interface: Relay switch signal or 12V level signal or 12V pulse signal with pulse width>100ms, driving current>10mA
Similar Product Recommend