ESD anti-static access control system air shower room

ESD anti-static access control system air shower room

ESD anti-static access control system air shower roomIt is an important supporting equipment for ultra clean studios and factories, used for air shower before operators enter the purified working environment to remove dust on the surface of their bodies and carried items. At the same time, it also serves as an airlock to prevent unpurified air from entering the purified area, ensuring the cleanliness of the purified environment.

Access control card swiping controls the air shower room, a system specifically designed to manage strict workshop settings. This system can effectively manage the effective access and attendance of personnel within the workshop; It can be set separately in the form of "password input", "fingerprint attendance", "card swiping entry", etc. Induction controlled air shower rooms are widely used for high confidentiality workshop doors, and personnel need to undergo identity authentication such as card swiping before entering. Workers do not need to swipe their cards when leaving the workshop, they only need to press the internal bounce one-way switch to unlock the interior.

This access control system uses ID cards and IC cards, which can be used interchangeably with the existing access cards of the customer company. The number of access cards can be increased at any time, and new cards can be magnetized or revoked at any time. The access control system adopts an integrated control electrical system. If you forget your password or lose your magnetic card, you can use the reset function. The specific operation is to remove the back cover of the door prohibition system, which has a 'reset' button inside. Use a screwdriver or other sharp object to hold it for 2-3 seconds, and the password will be repeated as the initial password (please refer to the instruction manual for the specific initial password).

2、 Technical parameters:

1. Dimensions: 2000 × 2300 × 2100

2. Purification area size: 1790 * 1390 * 1950

3. Filter purification efficiency:≥ 0.5um dust ≥ 99.91% (sodium flame method)

4. Jet velocity: ≥ 22m/sec

5. Wind shower time: 0～99secadjustable

6. Circulating air volume:2800-3200 m³/h

7. Power supply: 380 V 50Hz

8. Maximum power consumption: 1.5 KW

9. Weight: 100kg

10. Filter size:820×600×1200

3、 Operation and usage:

1. Enter the air shower room, press the power start button (red) on the electrical control board, turn on the power, and the LED digital screen will start. Press the lighting button (blue lighting pattern) on the control panel, and the fluorescent light in the air shower room will turn on.

2. Before blowing, press the (∨∧) button to set the blowing time. Press the air supply control button (blue), the fan will blow air, and the person being blown by the air will start blowing. The digital display screen will count down. After reaching the set time, the time relay will cut off the power supply of the fan and stop the air supply. If the power outage loses control, the air shower personnel can directly press the indoor power stop button (red) to cut off the power.

(Note: Please close if out of control)totalStop the power supply for one minute and try running it again. If the above loss of control still occurs, please contact our company. ）

If someone continues to be exposed to the wind, after the previous person has finished the air shower, they do not need to press the indoor power stop button and can simply walk out of the air shower and close the door behind them; The personnel who received the last air shower enteredAfter being exposed to the wind, press the wind down buttonThe shower button can directly perform air shower.

3. The front and rear doors of the air shower room must not be opened simultaneously to prevent non purified air from polluting the purification work area.