ES300 Edward Vacuum Pump Repair

ES300 Edward Vacuum Pump Process Application Coating, sputtering, ion plating Gas replacement, filling, and vacuum insulation. Vacuum heat treatment furnace, sintering furnace, brazing furnace. Vacuum drying, freeze-drying, and vacuum degassing. Leak detection device, vacuum forming, vacuum casting. Vacuum packaging, vacuum adsorption, transportation, and others. Vacuum pump maintenance instructions:

1,ES300 Edwardvacuum pump maintenanceIt is a precise technology with strict requirements and conditions, requiring a lot of environmental and tool requirements,according tosceneThe situation can be repaired on-site，The problem is complex and seriousVacuum pump maintenance is carried out by taking the pump back to the maintenance company for repair.

2,Maintenance cycle issues; The maintenance cycle is generally within3-5Oh my god,againThe maintenance cycle for miscellaneous structures and high vacuum pumps will be extended, usually by7to15around a day，,Including cleaning, repair, assembly, and major testing processes! Aifa TechnologySN6501Vacuum pump in long-term useifThe following phenomena occurwillStuck and oil leakage, requires major repairs：

1Friction on the surface of the end cap

2There are friction marks on the surface of the rotor

3The bearing is covered with dirt

4Shaft seal oil leakage

5The rotary blade is damaged

6Wear of shaft sleeve

ES300 Edwardvacuum pump maintenanceThe details are as follows:

1. Replace conventional consumables. For example, Edward vacuum pump accessories such as oil mist separators and blades; Especially for oil mist separators, they must be replaced promptly when problems arise. The replacement method is relatively simple, just open the end cover to replace the oil mist separator, and pay attention to whether the installation is in place.

2. Change the oil. Replace the Edward vacuum pump oil that has been used for a long time, clean the dirt and debris in the oil tank and cylinder body, and ensure the normal operation of the vacuum pump and the stability of the vacuum degree!

3. Repair. The main focus is on repairing the connecting parts and cylinder body, which is also the most crucial and important step. Generally speaking, after using an Edward vacuum pump for a period of time, if the cylinder body wears out, it will lead to insufficient vacuum degree of the vacuum pump. The method to repair the cylinder block is to polish it with sandpaper.

4. Test the machine. Generally, after repair and maintenance are completed, the vacuum pump should be tested to ensure that the vacuum degree of the vacuum pump meets the requirements