Introduction: The EM2210 electromagnetic ultrasonic thickness gauge, a non-contact pen type thickness gauge, is used to measure the thickness of steel pipes, plates, bars, and other steel structures, as well as aluminum and other metallic materials. When measuring, no coupling agent is required, and the surface is not treated. The distance between the sensor and the test object can reach 4 millimeters, and rust proof film, salt deposits, or any other insulation coating (paint, varnish, enamel, plastic material, etc.) can be used as the operating gap.

Can.

(2) During the testing process, there is no need to polish the surface of the workpiece or use coupling agents;

(3) The instrument adopts the principle of electromagnetic ultrasound, and the probe and instrument are integrated into one machine. The probe can be quickly replaced, and the probe and the host are threaded

Link;

(4) Receiving gain range: 0-100dB;

(5) Frequency range: 3.5-5.5MHz, with a step value of 0.1MHz, which can be quickly selected in the software.

*2. Large lift off (working gap between sensor and detection object): 4mm, rust proof film, salt deposit or any other insulation

Edge coatings (such as paint, varnish, enamel, plastic materials, etc.) can be used as operating gaps;

3. Measurement range 2mm-60mm;

4. Measurement accuracy of 0.01mm;

5. Operate the transducer with a tilt angle of ± 25 degrees;

6. The adjustment range of sound velocity is 1000-99999m/s in 1m/s;

7. Power supply: Built in lithium battery power supply, continuous working time ≥ 5 hours, interval working time not less than 24 hours;

8. Three thickness measurement modes: (1) fully automatic measurement mode, one click measurement without human intervention;

(2) Semi automatic measurement mode, one click switch;

(3) Full manual measurement mode, switch with one click.

9. The small curvature range of detectable workpieces is 9mm;

10. Software provided in dedicated tablets, tablets and software;

11. Communication interface:Micro USB

*12. Pen style mainframe size: 163X39X32mm;

*13. A product authorization letter from the manufacturer or general agent is required;

14. Lifetime free software upgrade;

15. The LCD display screen can be seen in sunlight;

16. Host weight: ≤ 600g;

17. Sound wave type: shear wave (transverse wave);

18. The excitation method is permanent magnet, with Br less than 13kGs;

*19. The waveform display methods include full wave, half wave, and radio frequency wave (which can be fast in the software)

Speed regulation);

EM2210 Electromagnetic Ultrasonic Thickness Gaugeconfiguration

1 host (including integrated probe), specialized software (installation)

1 set in the host, 1 dedicated tablet computer, external flaw detection software set, charging

2 electrical appliances, 1 portable bag, 1 carbon steel calibration test block, * * portable rope

One by one;

Our company has a large amount of stock, please feel free to call for consultation!