E+H PMP55 Absolute and Gauge Pressure Transmitter

E+H PMP55 Absolute and Gauge Pressure Transmitter

Directly measure the mass flow rate of various gases and provide temperature output.

The Proline series transmitters have the following advantages:

·By adopting a modular structure design and operation method, the transmitter has higher measurement efficiency

·Quick setting operation menu facilitates user instrument debugging

·The instrument software has up to 20 commonly used pure gases built-in, allowing users to flexibly select a single gas or a mixture of up to 8 gases (such as biogas) for measurement

The T-Mass sensor has the following advantages:

·The pressure loss can be ignored

·Large travel ratio, up to 100:1

·Plug in sensors are suitable for circular or rectangular pipelines through parameter settings

·Each flowmeter undergoes single instrument calibration and comes with a traceability calibration certificate in the packaging

·According to user needs, a flow regulator can be used for calibration

·Optional cooling equipment for easy removal/replacement in low-pressure and non-toxic gas applications

Multiple types of gas mass flow measurements can be performed, such as:

·Compressed air

·Natural gas entering the boiler/dryer

·Carbon dioxide gas in breweries

·Biogas and aeration in sewage treatment plants

·Gas products (such as Ar, N2, CO2, He, O2)

·E+H PMP55 Absolute and Gauge Pressure Transmitterleak detection

· ATEX, FM, CSA, IEC Ex, NEPSI

Connection interfaces with various common process control systems:

· HART, PROFIBUS DP, MODBUS RS485

65I-30AA0AD1A1AABA

Plug in thermal gas mass flowmeter 65I

[30] Plug in pipe length: 335 mm 13 '

[A] Material insertion type pipeline; Sensor: stainless steel; stainless steel

[A] Process connection: 1 'MNPT, threaded ANSI, clamping device, stainless steel

[0] Joint sealing ring: PEEK, -40...+130oC/-40...+266oF

[A] Surface polishing: Basic type

[D] Calibration: Factory calibration

[1] Additional testing, certificate: Basic type

1] Shell: Integrated aluminum, IP67, -40oC

[A] Cable entrance: Cable sealing sleeve M20 (EEx d>thread M20)

[A] Display; Operation: 85-260VAC, 2-line+button

[B] Software features: Factory settings; air Numerous and diverse diaphragm sealing materials and process connections

Excellent repeatability and long-term stability

Applicable to process pressure monitoring of SIL2 functional safety system

Simple and secure menu guided operation mode: can be operated using the on-site display module; Or remotely operate through 4 to 20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus communication methods.

Modular design, measuring differential pressure, static pressure, and pressure (Deltabar M - Deltapilot M - Cerabar M). For example, replaceable display modules and main electronic modules.

Seamless and independent system integration (HART/PA/FF)

Brand new TempC membrane minimizes the impact of temperature and has a short recovery time

application field

Single chamber aluminum or stainless steel (316L) casing

Process links: threaded, flanged, or sanitary connections

Temperature range: -70 to+400 ° C (-94 to+752 ° F)

Pressure range:+400mbar to+400bar (+15 to+6000psi)

Accuracy error: ± 0.15%, 'Platinum version' ± 0.075%