Dynapar encoder HSD35409694A5

Dynapar encoder HSD35409694A5

Dynapar encoder HSD35409694A5

9.52mm/10mm/12mm (solid axis)

flange

(Installation of shell)

Synchronous flange, clamping flange

Square flange, synchronous clamping flange

Protection of shaft ends, etc

(EN60529)

IP64 or IP67

Protection level of the shell

(EN60529)

IP65 or IP67

Axial load, axial/radial? 12mm:60N/80N

?7-10mm:40N/60N

?6mm/6.35mm:20N/40N

High speed 10000rpm

Typical starting torque ≤ 0.5Ncm

≤1Ncm(IP67)

Pulse count: RI58-O:

1/2/3/4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/

128/144/150/180/200/230/250/256/300/314/350/360/375/400/460/480/

500/512/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800

/2000/2048/2500/3000/3480/3600/3750/3968/4000/4096/4800/5000

5400/6000/7200/7680/8000/8192/9000/10000

Other pulse count products can be provided upon request.

Commonly used models are indicated in bold.

Pulse count: RI58-O:

4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/128/144

/150/180/200/230/250/256/300/314/350/360/375/400/460/480/500/512

/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800/2000/

Blue sensor VCC sensor

Brown Channel A Channel A Channel A

Green Channel A Channel A

Grey Channel B Channel B Channel B

Pink Channel B Channel B

Red Channel N Channel N Channel N

Black channel N channel N

White/Green GNDGNDGND

Purple (white)

1 white, with RS422+sensor (T)

2 depends on the ordering code

3. Connected to the encoder housing

electrical connection

TPE cable standard industrial type RI58-O/RI58-T

Incremental solid axis coding

Synchronous flange, 58mm

Connecting cables, axial/radial

12 pole connector, axial/radial

Install thread M4x5

Elastic installation, cable bending radius R ≥ 100mm

Fixed installation, cable bending radius R ≥ 40mm

Dimension unit: mm

Clamping flange, 58mm

Connecting cables, axial/radial

12 pole connector, axial/radial

Install thread M4x5

Elastic installation, cable bending radius R ≥ 100mm

Fixed installation, cable bending radius R ≥ 40mm

Square flange, 63.5mm x 63.5mm

Square flange, 80mmx80mm

Standard: 0 ° C to+70 ° C

Special: -25 ° C to+85 ° C

Its features include:

Heavy duty system, passed impact testing.

·High mechanical performance, shock and vibration resistance.

·Large, fully sealed ball bearings.

·Accurate nickel or glass pulse discs provide highly precise disc segmentation.

·The pulse disk and scanner are separate.

·High protection level IP55 or IP56.

·Can provide a combined system with a speed generator and overspeed switch.

·Resist instantaneous short circuit

·Unrestricted.

·Not affected by external pulses, certified by EMI.

FGH8

Proportional Boluo detailed explanation: The hollow shaft diameter can reach 80mm,

The pulse rate can reach 8192

Technical parameters: Electrical parameters

Power supply 12V to 30VDC

Fluctuations: up to 10%

The no-load current is approximately 100mA when supplied with 30V power

Output: push-pull circuit output, resistant to instantaneous short circuit

Pulse height: 1) Approximately equal to the supply voltage

Special output: 5V to RS422

Frequency range: 0 to 100kHz (150kHz)

Load capacity: 50mA output per channel

Internal resistance: 50 Ω per output

Pulse duty cycle: 1:1 ± 5%

Rotation rate: 50V/μ s

Temperature range: The allowable ambient temperature depends on the heat generated by friction, indirectly determined by speed and protection level.

Electronic part temperature: -25 ° C to+85 ° C

121312 position multi turn+13 position single turn f.47 sleeve IF64l2mmDConin12 pole, radial clockwise direction

G=Conin12 poles, counterclockwise axis

H=Conin12 poles, radially counterclockwise

7=M12, 8-pole, oil oriented

8=M12, 8-pole, radial

Z=Bus illuminated, 3 cable glands

T2 bus housing, 4-pole w plug (for TICO display)+2 cable glands

Standard industrial type RI58-O/RI58-T

Incremental/Solid Shaft

Up to 10000 pulses and 40000 steps

■ High signal accuracy

■ Protection level up to IP67

Working temperature up to 100 ℃ (RI58-T)

■ Multiple flange options and configurations are available, with strong versatility

Suitable for strong impact levels

Application scenarios, such as machine tools, CNC shafts, packaging machines, motors/drivers, injection molding machines, sawing machines, textile machines

For information about the EX version, please refer to RX70-I

Technical data (mechanical):

Outer diameter 58mm

Shaft diameter 6mm/6.35mm/7mm/

9.52mm/10mm/12mm (solid axis)

flange

(Installation of shell)

Synchronous flange, clamping flange

Square flange, synchronous clamping flange

Protection of shaft ends, etc

(EN60529)

IP64 or IP67

Protection level of the shell