Dynapar encoder HSD35409691BR

Dynapar encoder HSD35409691BR

Dynapar encoder HSD35409691BR

Power supply 12V to 30VDC

Fluctuations: up to 10%

The no-load current is approximately 100mA when supplied with 30V power

Output: push-pull circuit output, resistant to instantaneous short circuit

Pulse height: 1) Approximately equal to the supply voltage

Special output: 5V to RS422

Frequency range: 0 to 100kHz (150kHz)

Load capacity: 50mA output per channel

Internal resistance: 50 Ω per output

Pulse duty cycle: 1:1 ± 5%

Rotation rate: 50V/μ s

Temperature range: The allowable ambient temperature depends on the heat generated by friction, indirectly determined by speed and protection level.

Electronic part temperature: -25 ° C to+85 ° C

Its features include:

·Heavy duty system, passed impact testing.

·High mechanical performance, shock and vibration resistance.

·Large, fully sealed ball bearings.

·Accurate nickel or glass pulse discs provide highly precise disc segmentation.

·The pulse disk and scanner are separate.

·Can provide a combined system with a speed generator and overspeed switch.

·Resist instantaneous short circuits.

·Unrestricted.

Universal industrial standard encoder+model AC58/0017

Power supply voltage 10+VDC or 5VDC-5%+10% shell diameter (unit: mm) 58

Inherent consumption current single/multiple turns 50m lamp 100m lamp 250. A (bus type) length (excluding shaft, unit mm) clamping flange 54.5. Synchronous flange 50.5 '

Output interface serial SSI.BiSS, parallel output "single coil" shaft sleeve type 54.3

Bus type Profibus DP. DeviceNet. CAN clamping flange 81.3. Synchronous flange 76.3

CANopen. Interbus bus bus type length shaft sleeve type 79.2

Output code Gray code or binary code Axis diameter x Axis length (unit: mm) Clamping flange 4510x19.5

Single lap split rate (ST) 10.12.13 bit, 14 bit, 17 bit synchronous flange 456x10

Brown/Green DC 5V/10-30V DC 10-30V DC 10-30V DC 10-30V

Blue sensor VCC sensor

Brown Channel A Channel A Channel A

Green Channel A Channel A

Grey Channel B Channel B Channel B

Pink Channel B Channel B

Red Channel N Channel N Channel N

Black channel N channel N

White/Green GNDGNDGND

Purple (white)

1 white, with RS422+sensor (T)

2 depends on the ordering code

3. Connected to the encoder housing

electrical connection

TPE cable standard industrial type RI58-O/RI58-T

Incremental solid axis coding

Synchronous flange, 58mm

Connecting cables, axial/radial

12 pole connector, axial/radial

Install thread M4x5

Elastic installation, cable bending radius R ≥ 100mm

Fixed installation, cable bending radius R ≥ 40mm

Dimension unit: mm

Clamping flange, 58mm

Connecting cables, axial/radial

12 pole connector, axial/radial

Install thread M4x5

Elastic installation, cable bending radius R ≥ 100mm

Fixed installation, cable bending radius R ≥ 40mm

Square flange, 63.5mm x 63.5mm

Axial load, axial/radial? 12mm:60N/80N

?7-10mm:40N/60N

?6mm/6.35mm:20N/40N

High speed 10000rpm

Typical starting torque ≤ 0.5Ncm

≤1Ncm(IP67)

Pulse count: RI58-O:

1/2/3/4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/

128/144/150/180/200/230/250/256/300/314/350/360/375/400/460/480/

500/512/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800

/2000/2048/2500/3000/3480/3600/3750/3968/4000/4096/4800/5000

5400/6000/7200/7680/8000/8192/9000/10000

Other pulse count products can be provided upon request.

Commonly used models are indicated in bold.

Pulse count: RI58-O:

4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/128/144

/150/180/200/230/250/256/300/314/350/360/375/400/460/480/500/512

/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800/2000/

2048/2500

Other pulse count products can be provided upon request.

Commonly used models are indicated in bold.

Technical data (mechanical)

■ Universal industrial standard encoder

Up to 10000 pulses and 40000 steps

■ High signal accuracy

■ Protection level up to IP67

Working temperature up to 100 ℃ (RI58-T)

■ Multiple flange options and configurations are available, with strong versatility

Suitable for strong impact levels

T=RS422+alarm R=RS422+sensing K=push-pull

C=Conin, Axial, clockwise C=Conin, axial, clockwise C=Conin, axial, clockwise

D=Conin, Radial, clockwise D=Conin, radial, clockwise D=Conin, radial, clockwise

E=TPE cable, axial E=TPE cable, axial E=TPE cable, axial

F=TPE cable, radial F=TPE cable, radial F=TPE cable, radial

G=Conin, Axial, counterclockwise G=Conin, axial, counterclockwise G=Conin, axial, counterclockwise

H=Conin, Radial, counterclockwise H=Conin, radial, counterclockwise H=Conin, radial, counterclockwise

K *=MIL10 poles, radial J=Binder6 poles, radial

O *=MIL10 poles, axial N=Binder6 poles, axial

K *=MIL10 pole, radial

O *=MIL10 pole, axial

axis

Version * not applicable to IP67 * * Other different flange versions can be achieved through the combination of clamping flange and flange adapter (see "attachment").

For example, RI58 with synchronous flange and 10mm shaft: can also clamp flange and 10mm shaft+synchronous flange adapter (1522328).

Upon request, other versions can be provided. Model Pulse Number 1 Power Supply Voltage Flange, Protection Level 2, Shaft 3 Output 4 Connection 5, 6

K. 43 clamping flange, IP64，7mm

K. 46 clamping flange, IP64，9.52mm

K. 42 clamping flange, IP64，10mm

K. 47 clamping flange, IP64，12mm

K. 76 clamping flange, IP67，9.52mm

K. 72 clamping flange, IP67，10mm

S. 41 synchronous flange, IP64，6mm

S. 45 synchronous flange, IP64，6.35mm

S. 71 synchronous flange, IP67，6mm

S. 75 synchronous flange, IP67，6.35mm

M. 46 synchronous clamping flange, IP64，9.52mm

M. 76 synchronous clamping flange, IP/67，9.52mm

Q. 46 square flange, IP64，9.52mm

Q. 42 square flange, IP64，10mm

Q. 76 square flange, IP67，9.52mm