Dynapar encoder HSD35409692C6

Dynapar encoder HSD35409692C6

Dynapar encoder HSD35409692C6

FGH6

Proportional Boluo detailed explanation: The hollow shaft diameter can reach 50mm,

The pulse rate can reach 5000

Technical parameters: Electrical parameters

Power supply 12V to 30VDC

Fluctuations: up to 10%

The no-load current is approximately 100mA when supplied with 30V power

Output: push-pull circuit output, resistant to instantaneous short circuit

Pulse height: 1) Approximately equal to the supply voltage

Special output: 5V to RS422

Frequency range: 0 to 100kHz (150kHz)

Load capacity: 50mA output per channel

Internal resistance: 50 Ω per output

Pulse duty cycle: 1:1 ± 5%

Rotation rate: 50V/μ s

Temperature range: The allowable ambient temperature depends on the heat generated by friction, indirectly determined by speed and protection level.

Electronic part temperature: -25 ° C to+85 ° C

Its features include:

·Heavy duty system, passed impact testing.

·High mechanical performance, shock and vibration resistance.

·Large, fully sealed ball bearings.

·Accurate nickel or glass pulse discs provide highly precise disc segmentation.

·The pulse disk and scanner are separate.

·Can provide a combined system with a speed generator and overspeed switch.

·Resist instantaneous short circuits.

·Unrestricted.

Universal industrial standard encoder+model AC58/0017

Power supply voltage 10+VDC or 5VDC-5%+10% shell diameter (unit: mm) 58

Inherent consumption current single/multiple turns 50m lamp 100m lamp 250. A (bus type) length (excluding shaft, unit mm) clamping flange 54.5. Synchronous flange 50.5 '

·Accurate nickel or glass pulse discs provide highly precise disc segmentation.

·The pulse disk and scanner are separate.

·High protection level IP55 or IP56.

·Can provide a combined system with a speed generator and overspeed switch.

·Resist instantaneous short circuit

·Unrestricted.

·Not affected by external pulses, certified by EMI.

FGH8

Proportional Boluo detailed explanation: The hollow shaft diameter can reach 80mm,

The pulse rate can reach 8192

Technical parameters: Electrical parameters

Power supply 12V to 30VDC

Fluctuations: up to 10%

The no-load current is approximately 100mA when supplied with 30V power

Output: push-pull circuit output, resistant to instantaneous short circuit

Pulse height: 1) Approximately equal to the supply voltage

Special output: 5V to RS422

Frequency range: 0 to 100kHz (150kHz)

Load capacity: 50mA output per channel

Internal resistance: 50 Ω per output

Pulse duty cycle: 1:1 ± 5%

Rotation rate: 50V/μ s

Temperature range: The allowable ambient temperature depends on the heat generated by friction, indirectly determined by speed and protection level.

Electronic part temperature: -25 ° C to+85 ° C

Its features include:

·Heavy duty system, passed impact testing.

·High mechanical performance, shock and vibration resistance.

·Large, fully sealed ball bearings.

·Accurate nickel or glass pulse discs provide highly precise disc segmentation.

·The pulse disk and scanner are separate.

Protection of shaft ends, etc

(EN60529) Protection level of IP64 or IP67 enclosure (EN60529)

IP65 or IP67 axial load, axial/radial? 12mm:60N/80N? 7-10mm:40N/60N

6mm/6.35mm: 20N/40N High speed 10000rpm Typical starting torque ≤ 0.5Ncm

≤1Ncm(IP67)RI58-ORI58-T

1/2/3/4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/

128/144/150/180/200/230/250/256/300/314/350/360/375/400/460/480/

500/512/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800

/2000/2048/2500/3000/3480/3600/3750/3968/4000/4096/4800/5000

5400/6000/7200/7680/8000/8192/9000/10000

Other pulse count products can be provided upon request.

Commonly used models are indicated in bold.

4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/128/144

/150/180/200/230/250/256/300/314/350/360/375/400/460/480/500/512

/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800/2000/

2048/2500

Other pulse count products can be provided upon request.

Commonly used models are indicated in bold.

Standard industrial type RI58-O/RI58-T

Incremental solid shaft

Encoder counter indicator relay printer paper cutter

Technical Data (Electrical)

The overall design complies with DINVDE0160, protection level III, pollution level 2,

Overvoltage level II

Power supply voltage: RS422+sensing (T): DC 5V ± 10%

RS422+alarm (R): DC 5V ± 10% or DC 10-30V

Push pull (K), push-pull complementary (I): DC 10-30V

Typical no-load current 40mA (DC 5V), 60mA (DC 10V)

30mA (24V DC)

2 sensors, VCC sensor, VccN. C. sensor, VCC sensor

3通道N通道N通道N通道N

4通道N通道NN. C.通道N

5通道A通道A通道A通道A

Channel A, Channel AN, C. Channel A

7N. C. Alarm Alarm Alarm

8 channels B channels B channels B channels B channels B channels

10GNDGNDGNDGND

11 Sensor GNDN. C.N.C.N.C

12 DC 5V DC 5/10~30V DC 10~30V DC 10~30V DC 10~30V

Shielded for use with CONIN connector cables.

electrical connection

M23 connector (Conin) 12 pin

electrical connection

MS connector, 10 pins

Pin Description RS422/Euro Pin Leads

(Connect code O and K)

Push-pull push-pull

1/A通道A通道A通道A

2/B channel B channel B channel B channel B

3/C channel N channel N channel N

4/D DC 5/10~30V DC 10~30V DC 10~30V DC 10~30V

5/E alarm alarm alarm

6/FGNDGNDGND

7/G channel A shielded channel A

8/H channel BN. C. channel B

9/I通道NN. C.通道N

10/J shielding shielding shielding

Pin allocation connector counter counterclockwise (CCW) connector clockwise (CW)