Dynapar encoder HSD35409686B8

Dynapar encoder HSD35409686B8

Dynapar encoder HSD35409686B8

·Heavy duty system, passed impact testing.

·High mechanical performance, shock and vibration resistance.

·Large, fully sealed ball bearings.

·Accurate nickel or glass pulse discs provide highly precise disc segmentation.

·The pulse disk and scanner are separate.

·Can provide a combined system with a speed generator and overspeed switch.

·Resist instantaneous short circuits.

·Unrestricted.

Universal industrial standard encoder+model AC58/0017

Power supply voltage 10+VDC or 5VDC-5%+10% shell diameter (unit: mm) 58

Inherent consumption current single/multiple turns 50m lamp 100m lamp 250. A (bus type) length (excluding shaft, unit mm) clamping flange 54.5. Synchronous flange 50.5 '

Output interface serial SSI.BiSS, parallel output "single coil" shaft sleeve type 54.3

Bus type Profibus DP. DeviceNet. CAN clamping flange 81.3. Synchronous flange 76.3

CANopen. Interbus bus bus type length shaft sleeve type 79.2

Output code Gray code or binary code Axis diameter x Axis length (unit: mm) Clamping flange 4510x19.5

Single lap split rate (ST) 10.12.13 bit, 14 bit, 17 bit synchronous flange 456x10

Each lap has 13 digits and 192 lines per day, with a hollow shaft sleeve of 12x18~20 coins.

Multi turn split rate (MT) continuous turns 12 digits 4096 turns hollow shaft sleeve coin 10x15 ` 20

Additional boost signal (optional) sine cosine A.B biphasic, 1Vpp high-speed continuous operation at 10000 revolutions per minute

2048 line short-term operation at 12000 revolutions per minute

Accuracy (absolute/repeatability) ± 35 '/± 7', starting torque/rotational inertia<0.01N/3.8x10-6kgm '

Parameterized AC1JR0soft software can be used to set the resolution and square resistance to impact of 1000m/s' (6ms), which is equal to loog

Warning, alarm, preset position switch anti vibration 100m/s' (10-2000Hz), equal to log

Green status is normal, red status is alarm, allowing axial rich movement/radial jumping of ± 1.5mm/± 0.2mm

Working temperature -40 ` 100 * C/-40 ` 85'C (S-shaped) large shaft load 6 axial 60N radial 110N

Protection level IP67 silicone shell/IP64 or IP67 contact seal) 10 axial 107N radial 16ON

ACURO Absolute Value Encoder Ordering Data:

AC58/121311.42SGB

Model AC58/0017EF: 42SGB

Resolution power supply voltage flange, protection, shaft diameter output interface electrical connection

Its features include:

·Heavy duty system, passed impact testing.

·High mechanical performance, shock and vibration resistance.

·Large, fully sealed ball bearings.

·Accurate nickel or glass pulse discs provide highly precise disc segmentation.

·The pulse disk and scanner are separate.

·Can provide a combined system with a speed generator and overspeed switch.

·Resist instantaneous short circuits.

·Unrestricted.

·Not affected by external pulses, certified by EMI.

FGH6

Proportional Boluo detailed explanation: The hollow shaft diameter can reach 50mm,

The pulse rate can reach 5000

Technical parameters: Electrical parameters

Power supply 12V to 30VDC

Fluctuations: up to 10%

The no-load current is approximately 100mA when supplied with 30V power

Output: push-pull circuit output, resistant to instantaneous short circuit

Pulse height: 1) Approximately equal to the supply voltage

Special output: 5V to RS422

Frequency range: 0 to 100kHz (150kHz)

Load capacity: 50mA output per channel

Internal resistance: 50 Ω per output

Pulse duty cycle: 1:1 ± 5%

Rotation rate: 50V/μ s

Temperature range: The allowable ambient temperature depends on the heat generated by friction, indirectly determined by speed and protection level.

Electronic part temperature: -25 ° C to+85 ° C

Its features include:

·Heavy duty system, passed impact testing.

■ Multiple flange options and configurations are available, with strong versatility

Suitable for strong impact levels

Application scenarios, such as machine tools, CNC shafts, packaging machines, motors/drivers, injection molding machines, sawing machines, textile machines

For information about the EX version, please refer to RX70-I

Synchronous flange

Clamping flange outer diameter 58mm, shaft diameter 6mm/6.35mm/7mm/9.52mm/10mm/12mm (solid shaft)

Flange (installation of casing)

Synchronous flange, clamping flange

Square flange, synchronous clamping flange

Protection of shaft ends, etc

(EN60529) Protection level of IP64 or IP67 enclosure (EN60529)

IP65 or IP67 axial load, axial/radial? 12mm:60N/80N? 7-10mm:40N/60N

6mm/6.35mm: 20N/40N High speed 10000rpm Typical starting torque ≤ 0.5Ncm

≤1Ncm(IP67)RI58-ORI58-T

1/2/3/4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/

128/144/150/180/200/230/250/256/300/314/350/360/375/400/460/480/

500/512/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800

/2000/2048/2500/3000/3480/3600/3750/3968/4000/4096/4800/5000

5400/6000/7200/7680/8000/8192/9000/10000

Other pulse count products can be provided upon request.

Commonly used models are indicated in bold.

4/5/10/15/20/25/30/35/40/45/50/60/64/70/72/80/100/125/128/144

/150/180/200/230/250/256/300/314/350/360/375/400/460/480/500/512

/600/625/635/720/750/900/1000/1024/1200/1250/1500/1600/1800/2000/

2048/2500

Other pulse count products can be provided upon request.

Commonly used models are indicated in bold.

Standard industrial type RI58-O/RI58-T

Incremental solid shaft

E=DC 10V-30VI=push-pull complementary R=RS422+alarm K=push-pull

I=push-pull complementary connection:

R=RS422+alarm connection:

A=PVC cable, axial B=PVC cable, radial C=Conin, axial, clockwise

D=Conin， Radial, clockwise E=TPE cable, axial F=TPE cable, radial

G=Conin, Axial, counterclockwise H=Conin, radial, counterclockwise

K=push-pull connection:

A=PVC cable, axial B=PVC cable, radial C=Conin, axial, clockwise

D=Conin， Radial, clockwise E=TPE cable, axial F=TPE cable, radial

G=Conin, Axial, counterclockwise H=Conin, radial, counterclockwise

J=Binder6-pole, radial N=Binder6-pole, axial

K *=MIL10 poles, radial O *=MIL10 poles, axial

A=DC 5V: Output: T=RS422+Sensor R=RS422+Alarm

T=RS422+sensor connection:

A=PVC cable, axial B=PVC cable, radial C=Conin, axial, clockwise

D=Conin， Radial, clockwise E=TPE cable, axial F=TPE cable, radial

G=Conin, Axial, counterclockwise H=Conin, radial, counterclockwise

R=RS422+alarm connection:

A=PVC cable, axial B=PVC cable, radial C=Conin, axial, clockwise

D=Conin， Radial, clockwise E=TPE cable, axial F=TPE cable, radial

G=Conin, Axial, counterclockwise H=Conin, radial, counterclockwise

Not suitable for IP67

**The combination of clamping flange and flange adapter (see "attachment") can achieve other different flange versions.

For example, RI58 with synchronous flange and 10mm shaft: can also clamp flange and 10mm shaft+synchronous flange adapter (1522328).

174 encoder counter indicator relay printer paper cutter

RI58-Ｔ; 4...2500

A=DC 5VE=DC 10V-30V

T=RS422+alarm R=RS422+sensing K=push-pull

C=Conin, Axial, clockwise C=Conin, axial, clockwise C=Conin, axial, clockwise