-
E-mail
info@hechen-tech.com
-
Phone
13818517313
-
Address
Room 219, Building 2, No. 525 Yuanjiang Road, Minhang District, Shanghai
Product Categories
Hechen Technology (Shanghai) Co., Ltd
Dynamic vacuum stability tester
NegotiableUpdate on 01/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The DELTI Vac REV dynamic vacuum stability tester is used to test the chemical stability of energetic materials (propellants, pyrotechnic agents, explosive waste, etc.) and hazardous chemicals. Place the test sample in the test tube, evacuate the test tube to a certain degree of vacuum, and heat the heating module at a constant temperature (30-160 ° C) for a specific period of time to measure the volume of gas released from the sample. Multiple samples can be tested simultaneously. The instrument is equipped with a high-sensitivity pressure sensor, which can be directly controlled, continuously collected, analyzed, and archived through software and computer connection.
Product Details
The DELTI Vac REV vacuum stability tester is used to test the chemical stability of energetic materials (propellants, pyrotechnic agents, explosive waste, etc.) and hazardous chemicals. Place the test sample in the test tube, evacuate the test tube to a certain degree of vacuum, and use the heating module to heat the test tube at a constant temperature (30-160 ° C) for a specific period of time to measure the volume of gas released by the sample. Multiple samples can be tested simultaneously. The instrument is equipped with a high-sensitivity pressure sensor, which can be directly controlled, continuously collected, analyzed, and archived through software and computer connection.
Compliant with standards: STANAG 4556, 4147, 4022/4, 4023, 4230, 4284, 4566,
MIL-STD-650,
STANAG 4178 and AOP-48
| Tube temperature stability | ± 0.025 °C |
| Temperature range limit | 200 / 250 °C |
| Typical sample weight | 5 g |
| Typical VST tube volume | 25 ml |
| Typical test time | 40 - 48 hours |
| Typical initial vacuum level | 300 Pa |
| Block heating rate | 3.3 °C/min |
Dynamic vacuum stability testerThe information is provided by Hechen Technology (Shanghai) Co., Ltd. If you would like to learn more aboutDynamic vacuum stability testerFor information such as quotation, model, parameters, etc., please feel free to call or leave a message for consultation.
