-
E-mail
accurate_6@126.com
-
Phone
18151072179
-
Address
B905, Building 2, 588 Binhe Road, Suzhou High tech Industrial Development Zone
Product Categories
Suzhou Aikolet Electronic Technology Co., Ltd
Dynamic torque DR-2212-R
NegotiableUpdate on 12/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Maintenance and upkeep of high-speed dynamic torque sensor: 1. Regularly lubricate the bearings at both ends of the torque sensor with grease
Product Details
High speed dynamic torque sensorMaintenance and upkeep:
1. Regular should be giventorque sensorAdd lubricating grease to the bearings at both ends. When adding lubricating grease, only open the bearing covers at both ends, add lubricating grease to the bearings, and then install the two end covers.
2. It should be stored in a dry, non corrosive environment with a room temperature of -20 ℃ to 70 ℃.
Notes:
1）. During installation, do not operate with electricity, and do not directly strike or collidesensor.
2）. The fastening bolts of the coupling should be tightened, and a protective cover should be added to the outside of the coupling to avoid personal injury.
3）. The signal line output must not be short circuited to ground or power supply, and the output current should not exceed 10mA. The shielding layer of the shielded cable must be connected to the common terminal (power supply ground) of the+15V power supply.
