Dynamic Signal Analyzer TBVNA-6000

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The dynamic signal analyzer TBVNA-6000 is equipped with multiple measurement functions and can perform detailed analysis of RF devices and components. The bandwidth ratio of this instrument is 1:6000000000, covering measurement applications from audio to RF.

Product Details

Dynamic Signal Analyzer TBVNA-6000

Dynamic Signal Analyzer TBVNA-6000Capable of multiple measurement functions, able to conduct detailed analysis of RF devices and components. The bandwidth ratio of this instrument is1 : 6000000000Covering measurement applications from audio to RF. Active through its full DC couplingVSWRElectric bridge, even at low levels1HzHigh accuracy can also be maintained in the measurement. This instrument can simultaneously use four independent measurement channels to achieve fast and accurate dual port measurements.

Analysis software has rich tools, such as spectrum analyzers or oscilloscopes, making the instrument a versatile assistant in development or testing applications.

n TBVNA-6000frequency range1Hz-6.0GHz, Resolution0.1Hz.

n signal generator@Unmodulated continuous wave1Hz-6.0GHzand0.1HzThe resolution

n 60 MHzDigital Oscilloscope@4通道、125Ms/sand14bitresolution

n 1Hz-6GHzSpectrum analyzer, equipped withDC-60 MHzClear frequency range and support up to6GHzActive sideband suppression for non spurious signal measurement under certain conditions.

n Dual channel spectrum analysis with cross-correlation

n IQStream receiver and file or Ethernet stream capability.(GNU radio compatible /Software Defined Radio)

n Power scanning measurement

n RF broadband power/voltage measurement

n THDAnalyzer (Harmonic Distortion Analysis)

n Phase noise analyzer.

n General noise and signal measurement

n BODETwo additional high impedance inputs have been added,1MOhm // 15PfUsed for gain/Phase measurement and/Or as a vector voltmeter

n BODEAdded an additional high-voltage signal output（+/- 10VHigh impedance and+/- 5Venter50Ohm), with a bandwidth of> 200 MHz(Full power)

Spectrum analyzer, phase noise analyzer

frequency range	1Hz-6GHz
Clearly define the frequency range	1Hz-60MHz
Parallel channel	2
Resolution bandwidth	0.1Hz-3MHz
Frequency step resolution	0.1Hz
frequency accuracy	±25ppm
amplitude precision	±1.5dB
Low spurious suppression (sideband suppression)	Multi frequency sampling
frequency point	Ren X
display function	RMSMinimum, maximum, average, and interrelationships
Maximum linear input power	+20dBm
Phase noise (low noise mode)@300MHz	＜-90dBc @ 100Hzoffset ＜-115dBc @ 1KHzoffset ＜-115dBc @ 10KHzoffset ＜-115dBc @ 100KHzoffset ＜-125dBc @ 1MHzoffset
Input noise voltage	＜30nV/Sqrt(Hz)@F>10KHz

signal generator@continuous wave

frequency range	1Hz-6GHz
Frequency step resolution	0.1Hz
Output power range	-7dBmto-60dBm @ 1Hz-500MHz -5dBmto<-80dBm @ 500MHz-6GHz
amplitude precision	±2dB @ -15dBmto-25dBm ±2.5dB @ -25dBmto-40dBm ±3dB @ -40dBmto<-80dBm
Phase noise (low noise mode)@300MHz	＜-90dBc @ 100Hzoffset ＜-115dBc @ 1KHzoffset ＜-115dBc @ 10KHzoffset ＜-115dBc @ 100KHzoffset ＜-125dBc @ 1MHzoffset

Oscilloscope, voltmeter

resolution	14bit(With)CICMaximum number of filters16Bit）
通道	4
input range	Maximum, ±3V；±20V BODE
memory	maximum,8192point
low-pass filter	CIC, adjustable
Sampling range（real）	15 S/s – 125MS/s
Scope of application（Sin(x)/x)	250 MS/s - 4 GS/s
bandwidth	60 MHz (Nyquist), 500 MHz (real)
protocol analysis	SPI，I²C，RS232
measurement function	24A measurement function, such asRMS, cycle…
trigger mode	Edge triggered, pulse triggered, manual, automatic,A>B
Trigger delay	0-1020A sample
input	50Ω single ended,1 MOhm // 15 pF with Option BODE
special	Trigger aperture and high-frequency suppression filter

High impedance input

input impedance	1 MΩ // 15 pF
frequency range	0-500MHz±20VAnd ±5VRange,250MHz±0.5Vscope
offset	< 1mV
voltage range	3 ranges:±20V,±5V,±0.5 V