Dry bath nitrogen blower

MTN dry bath nitrogen blower (aluminum block heating)

Product Introduction

MTNProduct features of series aluminum block heating dry nitrogen blowing concentrator:

Four sets of digital displays respectively display the set temperature and actual temperature of the device, as well as the set timing and incremental timing.

It can work in two ways: timed constant temperature or continuous constant temperature.

Ultra thick heating block height70mmMake the overall temperature of the hot block more uniform and accurate, and the temperature of the hot block will also be directly detected by sensors.

The automatic protection of the upper limit temperature of the hot block can prevent overheating.

A variety of constant temperature dry baths with multiple hole numbers and corresponding blowing needles are available for selection.

Internally designed with a water box to prevent accidental spillage of liquid during operation, in order to prevent damage to the internal circuit.

A well-designed internal structure of the instrument allows it to operate at a relatively high constant temperature for a long time.

General Technical Parameters

MTNTechnical parameters of series aluminum block heating dry nitrogen blowing concentrator:
Temperature regulation range: room temperature+5℃～180℃

Temperature regulation accuracy:±0.1℃

Upper limit temperature protection:185℃

Temperature deviation protection (℃): set temperature+5

Timed time:10Minutes~99hour59divide

Heating block size(mm)：150Wx70Hx95

Number of heating block holes:12Kong/24Kong/40Kong

Heating power:350W

Capacity for heating:2or1

Overall dimensions(Excluding the height of the support rodmm）240Wx130Hx215D