Double layer small capacity constant temperature incubator

1、 Product Introduction

Double layer small capacity constant temperature shakerIt is a commonly used laboratory equipment for precision cultivation and preparation in scientific research, education, and production departments such as biology, microbiology, genetics, viruses, environmental protection, and medicine.

Its main features are:

1. The box has a large volume,Layered up and down,It can be heated and cooled, with a wider range of applications and better comparative effects.

2. The thermal insulation material of the oscillating incubator is polyurethane foam, which has strong anti-interference ability to external cold and heat sources, good thermal insulation and convenient cleaning.

3. There is an air duct in the working chamber with uniform temperature distribution High temperature control accuracy.

4. The inner wall is made of high-quality stainless steel with excellent corrosion resistance. Turn on the lighting and observe the studio clearly through the glass door.

5constant temperaturesystemCapable of intelligent temperature control37 ℃, fluctuation<0.3 ℃.

6. The universal spring bottle rack is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments.

2、 Technical indicators：

1. Display mode: LCD (microcomputer environment scanning microprocessor chip)

2. Temperature control range: 4 ℃-60℃；

3. Temperature control accuracy:+0.1℃ at 37℃；

4. Oscillation speed: Start up-300r/min ；

5. Amplitude: 26mm cyclotron;

6. Temperature uniformity: ＜ 0.3 ℃;

7. Timing range: 0-9999min

8. Display mode: LCD display

9Heating power:380W ；

10Compressor power:250W ；

11. Tray size（mm)：496×350；

12. Inner container size (mm): 615×440×640；

13. Dimensions (mm): 720×630×1275；

14. Standard configuration: 250ml26 pieces

15Power supplycommunication:220V 50Hz ;

IIIMaintenance and upkeep:

The incubator should be placed in a clean, tidy, dry, and ventilated workspace; Before use, all control switches on the panel should be in a non working state; Place the test samples on the cultivation rack, and maintain an appropriate distance between each test bottle (or vessel) to facilitate the circulation of hot (cold) air convection; Connect the external power supply and place the power switch inIn the "on" position, the indicator light is on; Select the cultivation temperature;

1. Adjust the temperature to the desired level and display the desired set temperature digitally. Please strictly follow the temperature controller manual when setting the temperature.

2. The actual temperature inside the working chamber is displayed digitally. If the ambient temperature is lower than the set temperature for heating. The incubator will automatically heat up, and if the ambient temperature is higher than the set temperature, the incubator will automatically cool down.

3. Observe the lighting switch inside the working chamber. After the work is completed, set all control switches to non working state and cut off the power supply.

This product comes with a two-year warranty and lifetime maintenance.

Our factory can design and produce special specifications.