Double-layer oscillator

NegotiableUpdate on 12/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The double-layer oscillator has the characteristics of large capacity, stable speed, and obvious oscillation effect, and is suitable for centralized constant temperature and cluster oscillation in specific constant temperature chambers. Not only can it provide oscillation efficiency for large-scale production operations and pilot testing in the field of biopharmaceutical research and application, but it also has strong economy and practicality, making it an ideal equipment for microbial and strain cultivation.

Product Details

Double-layer oscillatorInstrument Features

① Double layer fixed fixture, 48 250ML beaker clamps * 2 layers;

② 1-9999 minute timer;

③ Stepless speed regulation, easy and safe operation, LED constant speed control.

Double-layer oscillatorProduct Parameters

Model number	HZQ-3112
power supply voltage	220V 50Hz
oscillation frequency	start-300turn/Split (stepless speed regulation)
Oscillation amplitude	20mm
Oscillation mode	Rotary type
timing	09999minOr normally open
working dimensions	250MLfixed fixture48a*2layer

Instructions for Use

1. Read all user manuals.

2. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine and have good grounding measures.

When replacing the fuse, the plug should be unplugged from the socket.

4. After the malfunction of electrical wires or equipment, it should be repaired by professionals. Using accessories not recommended by the manufacturer may cause certain quality problems.

5. When used in an environment with children, close attention should be paid.

During use, it is strictly prohibited to insert fingers into the gaps of movement.

7. The machine is strictly prohibited from moving during operation.

maintenance

1. Proper use and maintenance of the instrument can prolong its service life by keeping it in good working condition.

During continuous operation, the instrument should be regularly inspected every three months to check for water droplets, dirt, and other debris falling into the motor and control components, as well as to inspect fuses, control components, and fastening screws.

3. The bearings of the rotating parts have been filled with an appropriate amount of lubricating grease (No. 1 calcium nanobase) before leaving the factory. During continuous operation of the instrument, lubricating grease should be added every six months, with a filling amount of about one-third of the bearing space.

After long-term use, natural wear and tear of the instrument is a normal phenomenon. If abnormal noise is found in the motor, worn bearings in the transmission part, loose or cracked belts, or electronic control components fail after one year of use, our company will continue to provide high-quality services and assist in handling them.