Dongri/TOHNICHI Open Swap Head Marking Torque Wrench

Scope of application

• Torque management of nuts.

• Prevent forgetting to tighten (error proof).

• Tightening of oil/air pressure pipelines.

• Engineering of motors/communication instruments/electrical equipment/air conditioning/gas, etc.

• MPQL/MQSP is suitable for fastening operations in narrow areas where hexagonal bolts cannot be used.

characteristic

• Once the set torque is reached, the MCSP torque wrench with a pre-set open exchange head will automatically mark the corner of the nut (bolt) side.

• There will be no such thing as "just marking and forgetting to tighten" that used to occur in the operations of "tightening with a torque wrench" and "marking with a pen".

• Pre set repetitive tightening operation with the same torque.

• There are three types of torque wrench bodies in the MCSP series, and the tightening torque range can correspond to 10 to 140N · m.

• There are 15 types of specialized exchange heads in the MCSP series, including open exchange heads that can handle nuts (bolts) with a width of W10-32mm.

• The MSH15D series has a smaller appearance compared to the ordinary open exchange head "SH series", so it can also be marked in very narrow places.

• We use disposable marking tools and do not require ink replenishment. A marking tool can mark approximately 2000 times. The exchange of marking tools is simple and can also be used for vertical marking.

• Special exchange heads with marked hexagonal bolts (cap screws) can be ordered. Please consult us for detailed information.

• The MCSP series will comply with ISO6789:2017 from January 2022. For detailed information, please refer to the technical document "ISO6789:2017 Standardization Measures" at the bottom of the screen.

• Wired MCSPLS and wireless error proof transmitter MCSPFHM can be ordered, both of which can implement interlocking control of the production line through tightening times.

Dongri/TOHNICHI Open Swap Head Marking Torque Wrench/Jiangxi Xingang Technology Supply