Dongguan Kedi Step in Salt Spray Laboratory

NegotiableUpdate on 06/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The names Dongguan Kedi walk-in salt spray test room, walk-in salt spray test room, walk-in salt spray test machine, and walk-in salt spray test box all refer to the same type of equipment, which can simulate salt spray corrosion environment and has sufficient space to allow personnel to enter and place or remove large specimens in artificial climate environment testing equipment.

Product Details

Dongguan Kedi Step in Salt Spray Laboratory

Walk in salt spray test roomIt is a large-scale artificial climate environment testing equipment used to test the environmental adaptability and reliability of products in industries such as machinery, defense industry, light industry electronics, and instrumentation. Its core function is to test the corrosion resistance of large industrial products and materials by simulating high salinity environments.‌‌‌

project	explanation
product name	Intelligent walk-in salt spray warehouse
model	KD-150F
Sample limitations	This testing equipment prohibits the testing of samples containing flammable, explosive, and volatile substances; Test for storing corrosive substance samples, test for storing organisms, test for storing strong electromagnetic emission source samples, and storage
Volume, weight, and size
Nominal content volume	About 1950rise
Effective size of inner box	Depth 1500 * Width 1000 * Height 1300mm Note: Depth refers to the dimension from front to back, width refers to the dimension from left to right, and height refers to the dimension from top to bottom.
Exterior space approximately	Deep 1900×Width 2240×High 1980 (mm) Please refer to the actual product for details
Machine weight approximately	800㎏
operating noise	≤ 75db measured at a distance of 1 meter from the front of the machine and 1.2 meters from the ground
Maximum power approximately	10KW
Maximum current	40A
Power supply conditions and sources	Three phase 380V+protective grounding Voltage allowable fluctuation range: ± 10% V Allowable frequency fluctuation range: (50 ± 0.5) Hz TN-S power supply or TT power supply The grounding resistance of the protective grounding wire is less than 4 Ω Require users to configure corresponding capacity air or power switches for the equipment at the installation site, and this switch must independently control the use of the equipment.
performanceindicator
Meet the testing standards		1.GB/T2423.17-2024/IEC 60068-2-11-2021Salt spray test method 2.ASTM. B117-2009salt spray test 3.JIS H8502Salt water spray test method 4.GB/T10125-2012/ISO 9227-2006Salt water spray test method 5.GB-T5170.8-2008Inspection methods for environmental testing equipment for electrical and electronic products-Salt spray testing equipment 6.GB-T5170.11-2008Inspection method for corrosive gas testing equipment 7.GJB150.11A-2009Laboratory environmental testing methods - Salt spray test 8.GB-T10587-2006Technical conditions for salt spray test chamber
temperature range
control accuracy	Temperature resolution: 0.1 ℃ Humidity resolution: 0.1% R.H Temperature deviation: ± 2.0 ℃ Temperature uniformity: ±2℃ Temperature fluctuation: ±0.5℃
heating rate	Laboratory heating rate: RT →+50℃≤25min Heating rate of saturated tank: RT →+65 ℃ ≤25 min
Test conditions	Laboratory temperature: RT~55 ℃ can be set arbitrarily (Salt spray corrosion test 35 ± 1 ℃/50 ± 1 ℃, pressure tank temperature: 47 ± 1 ℃/63 ± 1 ℃) Spray volume 1.0~2.0 m1/80cm ²/h (collect at least 16 hours and take the average value) Relative humidity: ≥ 85% R.H Salt water concentration: 5% or concentration of 5% plus 0.26 grams of copper chloride (CuCl)22H2O） Spray pressure: 1.00 ± 0.01kgf/cm² PH value: Neutral test 6.5-7.2 Acid test 3.0-3.3 Installation angle of sample plate: 15 °~30 °

Dongguan Kedi Step in Salt Spray LaboratoryThrough its large space design and precise environmental control, it provides a reliable corrosion resistance testing platform for large industrial products.