Domestic Lide wireless laser axis alignment instrument

The domestically produced Lide Wireless Laser Axis Alignment Instrument NIEDOX-LASER02 is a linear laser axis alignment system that includes two measuring units mounted on both sides of the shaft or coupling. After rotating the shaft to different measurement positions, the system calculates the offset and angular centering error between the shafts. These values of $r $n will be compared with user-defined tolerance values and can be adjusted immediately for the machine. During the measurement process, measurements will be taken from three angles with an interval of at least 20 degrees;. Because the axis rotates through an arc, any parallel misalignment or angular misalignment error will cause the detector to measure the difference in their mutual positions.

Domestic Lide wireless laser axis alignment instrumentNIEDOX-LASER02

Introduction
Overview of Lide NIEDOX-LASER02 Laser Alignment Instrument
Overview of Axis Alignment
Axis alignment is one of the main and easily preventable solutions for premature failure of mechanical equipment. When the machine equipment operates without achieving optimal axis alignment, it may lead to the following consequences:
·Machine performance**
Increased energy consumption
·Increase noise and vibration
·Premature wear and failure of bearings
·Aging and failure of accessories such as acceleration gaskets, fillers, and mechanical seals
The probability of coupling wear is higher
Increase unplanned downtime
Proper alignment refers to the fact that the centerlines of each axis are collinear when the machine is under load and at normal operating temperature. This is commonly referred to as axis to axis alignment. If the axes of the unit are not collinear, the machine will experience misalignment during operation. The goal is to align the centers of all axes of the machine on a straight line.
The NIEDOX-LASER02 laser axis alignment tool produced by Ningbo Lide Company is a wireless axis alignment tool that can easily and accurately align the axes of driving equipment (such as motors) and driven equipment (such as pumps)

Domestic Lide wireless laser axis alignment instrumentNIEDOX-LASER02

working principle
Lide NIEDOX-LASER02 laser alignment instrument is a linear laser axis alignment system, which includes two measuring units mounted on both sides of the shaft or coupling. After rotating the shaft to different measurement positions, the system calculates the offset and angular centering error between the shafts.
These values will be compared with user-defined tolerance values and the machine can be adjusted immediately. During the measurement process, measurements will be taken from three angles with an interval of at least 20 degrees. Because the axis rotates through an arc, any parallel misalignment or angular misalignment will cause the detector to measure the difference in their mutual positions.
Low power Bluetooth wirelessly transmits the positioning information sent by the measurement unit to the display device, which calculates the misalignment of the axis and recommends adjustments to the machine's feet. If the shafts of the unit are not aligned, the machine will definitely experience misalignment during operation. The actual axis position can be displayed in three-dimensional space, while the centerline can be defined mathematically, making it easier to identify the relationship between the axis and the coupling as offset or angular deviation.

Lide NIEDOX-LASER02 complete set of components
1. One NIEDOX-LASER02-S measuring unit

2. One NIEDOX-LASER02-M measuring unit
3. NIEDOX-LASER02-1 fixed bracket 2 sets
4. NIEDOX-LASER02-2 chain 400mm 2 pieces
5. NIEDOX-LASER02-3 chains 1000mm 2 pieces
6. NIEDOX-LASER02-4 support rod 160mm, 4 pieces
7. 2 NIEDOX-LASER02-B Bluetooth receivers
8. 1 copy each of warranty card, certificate of conformity, and instruction manual
9. One USB flash drive for the central program software
10. Bring your own computer or tablet (or purchase it on your behalf)

Technical specifications

Order model NIEDOX-LASER02
Describe NIEDOX-LASER02 laser axis alignment instrument
Measurement unit
Sensor Type 2 650mm Red Line Laser PSD
The electronic gyroscope is ± 0.1 °
Information Transmission 4.0 Wireless Bluetooth, Range 10m
Shell material ABS plastic
Color: Metallic Silver Grey
Dimensions (length x width x height) 90.5x81x49mm
Weight 415g
Measure distance from 0.25 to 10m
Measurement error * 0.01mm
Power supply and battery
Power supply and battery
The test unit runs continuously for 5 hours
Li-On rechargeable

Electric quantity indicator light

The entire system
Including components
2 Bluetooth transmitters

2 measuring units
2 mechanical fixed brackets
2 locking chains
Operation requirements

Working temperature from 0 ℃ to+40 ℃! Relative humidity 10% to 90% non condensing
IP rating IP54
Warranty period of 1 year