Displacement, counting, and angle display control instruments

NegotiableUpdate on 05/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Displacement, counting, and angle display control instruments are equipped with resistance rulers and potentiometers. Single 6-digit LED display with a display range of -99999 to 99999. The input circuit has been optimized for the characteristics of the resistance ruler (potentiometer), resulting in improved display and measurement stability, as well as enhanced resistance to electromagnetic interference and series mode interference. 0.05 level accuracy, measurement and control speed can be set between 5-200 times per second, display range -99999 to 99999. Panel buttons and switch input setting function. Welcome to consult with all users.

Product Details

Displacement, counting, and angle display control instrumentsConnect resistance ruler and potentiometer. Single 6-digit LED display with a display range of -99999 to 99999. The input circuit has been optimized for the characteristics of the resistance ruler (potentiometer), resulting in improved display and measurement stability, as well as enhanced resistance to electromagnetic interference and series mode interference. 0.05 level accuracy, measurement and control speed can be set between 5-200 times per second, display range -99999 to 99999. Panel buttons and switch input setting function. Welcome to consult with all users.

Displacement, counting, and angle display control instrumentsBasic specifications

project		specification
power supply voltage	ACpower supply	100~240 V AC 50/60 Hz
	AC/DCpower supply	10~24V AC 50/60 Hz；10~24V DC
power consumption	ACpower supply	7 VAbelow
	AC/DCpower supply	AC：6 VAfollowing;DC：5Wbelow
Allowable voltage variation range		The voltage of the power supply90%~110%
insulation resistance		≥100MΩ（500V DC MEGABenchmark)
insulation strength		2000V AC (Test conditions:50/60Hz，1Minutes)
anti-interference		IEC61000-4-2(Electrostatic discharge))Grade III IEC61000-4-4(Electric Fast Transient Pulse Group), Level III IEC61000-4-5(Surge), Level III
Protection level		IP65(Product front panel protection)（GB/T42-2008）
runtime environment	ambient temperature	-30~60℃(Save:-40~65℃）
	ambient humidity	35~85 %R•HNo condensation
	Installation location	Indoor, height<2000m

XSAEW-AHWT1A0 input specifications

project	specification
Measure and control speed	5/20/60/100/200time/Available in seconds
basic error	The measurement and control speed is5time/In seconds, the error is less than ±0.05 %F•S The faster the measurement and control speed, the greater the error
display range	-99999~99999, resolution1/10000
Display specifications	6bitLEDdisplay

Analog input signal type

project		measurement range
potentiometer	W	Range of resistance specifications0.5~100kΩ is acceptable

XSAEW-AHWT1A0 optional specifications

project			specification
alarm output	160×80size	T1~T4	1~4The output of the alarm relay is normally open+Normally closed dual contacts		250V AC/3A resistive load
	96×48size	T1~T2	1~2The output of the alarm relay is normally open+Normally closed dual contacts
		T3	3The output of the alarm relay is a single normally open contact
enter	K1		1Click to enter (Select)K1At that time, communication and transmission can only choose one
Analog output	A1		current output(4~20)mAThe(0~10)mAThe(0~20)mA		Optoelectronic isolation, resolution:1/3000Load capacity:600Ω
	A2		voltage output(0~5)VThe(1~5)V
	A3		Voltage output（0-10）V
communication interface	S1		RS232interface	Photoelectric isolation, Response time: less than500μS(Measurement value) Communication protocol selected through software （TCASCIIorModbus-RTU）
	S2		RS485interface
power supply specification	V0		100~240V AC（50/60Hz）