Displacement/Counting/Angle Display Controller

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The displacement/counting/angle display controller is equipped with a resistance ruler, eddy current displacement sensor, etc. 0.2 level accuracy, measurement and control speed of 10 times per second. Display range -1999 to 9999. Panel buttons and switch input zero function. There are two panel forms to choose from: basic type and functional type. 8-segment line correction function. Optional 1-4 point alarm output. This includes five basic alarm modes: upper limit of measurement value, lower limit of measurement value, upper limit of deviation, lower limit of deviation, and absolute value of deviation, as well as five standby alarm modes corresponding to the five basic alarm modes. Welcome to consult with all users.

Product Details

Displacement/Counting/Angle Display ControllerConnect resistance gauges, eddy current displacement sensors, etc. 0.2 level accuracy, measurement and control speed of 10 times per second. Display range -1999 to 9999. Panel buttons and switch input zero function. There are two panel forms to choose from: basic type and functional type. 8-segment line correction function. Optional 1-4 point alarm output. This includes five basic alarm modes: upper limit of measurement value, lower limit of measurement value, upper limit of deviation, lower limit of deviation, and absolute value of deviation, as well as five standby alarm modes corresponding to the five basic alarm modes. Welcome to consult with all users.

Displacement/Counting/Angle Display Controllerdetailed introduction

Connect resistance gauges, eddy current displacement sensors, etc.
0.2 level accuracy, measurement and control speed of 10 times per second. Display range -1999 to 9999.
Panel buttons and switch input zero function.
There are two panel forms to choose from: basic type and functional type.
8-segment line correction function.
Optional 1-4 point alarm output. This includes five basic alarm modes: upper limit of measurement value, lower limit of measurement value, upper limit of deviation, lower limit of deviation, and absolute value of deviation, as well as five standby alarm modes corresponding to the five basic alarm modes.
(Standby alarm mode: Refers to the situation where the instrument does not alarm even when it is in the alarm zone when powered on. When the measured value enters the non alarm zone, a standby condition is established and normal alarm is triggered thereafter.).
4 optional external power sources.
Optional communication, transmission, and printing functions.

1 Basic specifications

power supply voltage	ACpower supply		100-240 V AC 50/60 Hz
	AC/DCpower supply		10-24V AC 50/60 Hz；10-24V DC
power consumption	ACpower supply		7 VAbelow
	AC/DCpower supply		AC：6 VAfollowing;DC：5Wbelow
Allowable voltage variation range			The voltage of the power supply90 ~ 110%
insulation resistance			100MAbove Ω（500 V DC MEGABenchmark)
Withstand Voltage			in2000 V AC 50/60Hzdown1minute
anti-interference			IEC61000-4-2(Electrostatic discharge))Grade III; IEC61000-4-4(Electric Fast Transient Pulse Group), Level III; IEC61000-4-5(Surge), Level III
Protection level			IP65(Front part of the product)
surrounding environment		temperature	-10 ~ 55℃；保存 -25~ 65℃
		humidity	35 ~ 85 %RH; Save35 ~ 85 %RH

2 Input specifications

Measure and control speed			10time/second
basic error			±0.2 %F.S
display range			-1999~ 9999
input signal	current	I	4-20mAThe0-10 mAThe0-20 mA
	voltage	V	0-5V DCThe1-5V DC
	potentiometer	W	500Ω~10KΩ
digital filtering	Inertia; Average value; moving average wait

3Select accessory specifications

Contact input	K	1Click on external input to reset to zero
Contact output	T1-T4	1-4Point,250VAC/3Aresistive load
Analog output (resolution)1/3000）	A1	current output4~20mAThe0~10mAThe0~20mA
	A2	voltage output0~5VThe1~5V
	A3	voltage output0~10V
communication interface	S1	TC ASCIIagreementRS232	Speed:2400；4800；9600；19200 Address:0 – 99 Response time:500MS(Measurement value)
	S2	TC ASCIIagreementRS485
	M1	Modbus-RTUagreementRS232
	M2	Modbus-RTUagreementRS485
Printing interface	P	Hardware clock
external power supply	B1	24V±5%，50mAbelow
	B1G	24V±5%，100mAbelow
	B2	12±5%，50mAbelow
	B2G	12±5%，100mAbelow