Direct reading spectrometer sample preparation lathe

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

When using a direct reading spectrometer to analyze non-ferrous metals, due to the soft texture of the metals, it is not possible to grind the samples using spectral grinding equipment. Therefore, a direct reading spectrometer sample lathe is needed to turn the samples.

Product Details

thatDirect reading spectrometer sample preparation latheIt is a targeted product specifically developed for spectral analysis. There are two models in total, one is the 180 type, with a maximum turning diameter of 180mm. If the sample clamping diameter is greater than 180mm, then the maximum turning diameter of the 280 type sample making lathe needs to be selected as 280mm.

280 typeDirect reading spectrometer sample preparation latheParameters are as follows:

1、 Processing scope:

Maximum turning diameter on the bed: ø 280mm

Maximum turning diameter on the trailer: ø 170mm

Center distance between two tips: 700mm

Spindle center height: 140mm

Bed width: 180mm

2、 Spindle

Spindle through-hole diameter: ø 26mm

Spindle inner hole taper: MT4

Spindle speed range: 150-2000rpm

3、 Feed and Thread

Maximum travel of the small trailer: 60mm

Maximum stroke of the middle drag board: 150mm

Maximum cross-section of the tool holder: 14x14mm

Metric thread range: 0.2-3.5mm

British thread range: 8-56TPI

3、 Tail seat

Tail socket sleeve diameter: ø 30mm

Tail socket travel: 105mm

尾座套筒内孔锥度: MT2

Horizontal adjustment: ± 5mm

4、 Motor

Main motor power: 850W DC

External dimensions and weight

Dimensions (length x width x height): 1220x660x560mm

Packaging box size (length x width x height): 1320x700x680mm

Net weight/gross weight: 196/225kg