Diosna Universal Blender V10~V1600

Diosna Universal Blender V10~V1600Product Introduction:

We recommend using the DIOSNA universal mixing mixer to produce powders, agglomerates, wet particles, and high viscosity mixtures.

Advantages:

ØDifferent designs designed specifically for applications

ØDifferent sealing options

ØShaft seals for air purification (unlike standard mechanical seals, they have almost no wear)

ØEasy to clean

ØThe stirring time for powdered materials is 2-4 minutes

ØAdd liquid within 2-6 minutes

ØVery suitable for intensive mixing of high viscosity materials or sensitive/fine products

Diosna Universal Blender V10~V1600Scope of application:Food industry, chemical industry, pharmaceutical industry, cosmetics industry

Design features:

² The blades on the product generate vortex like circulation

² The pot body is designed as a cylindrical shape with a conical upper part, which causes the material to turn towards the center of the pot body, thereby forming a vortex like circulation of the material

² The center of the stirring blade is designed to be very large to ensure that there will be no mixed materials in the low centrifugal force area

² The mixing blade is large and close to the bottom of the container to achieve excellent mixing and rapid discharge

² The cutting blade is located in the fastest part of the mixing zone to provide excellent liquid distribution and reduce the density of oversized particles and wet particles

² High centrifugal force is transmitted to the material

² During the stirring process, a material circulation is established, allowing the material to reach the top of the vortex through strong stirring by the cutting blade, and then return to the middle to repeat the cycle

² The special structural design of the pot body and stirring blade allows the filling amount to be between 30% and 90%

Design highlights of V10~V1600:

The flexible concept of the V10-1600 series has multiple applications, and the installation, loading, unloading, and control of the mixing mixer have been automated in various application scenarios.

The Diosna universal mixing mixer V10~V1600 series equipment has been validated, and its mixing and stirring function ensures effective stirring in various applications. Ensure excellent performance through specialized loading, unloading, and installation design.

Ø clean

The mixing mixer is easy to clean and inspect. The parts that come into contact with the product can be cleaned with water, and if necessary, cleaning agents can be used inside the pot for repeated loading and unloading cleaning. If necessary, additional cleaning nozzles can be added to optimize cleaning. At the same time, it can also provide a cleaning device for air purification shaft seals.

Ø control

The control of the equipment can be simple or complex as needed. We can provide a simple one with a timer and buttons

Relay control can also provide HMI controlled by PLC or industrial computers with network connections.

Ø Stirring blade lifting system

To check the bottom and shaft seal area of the mixing blade, pneumatic lifting of the mixing blade can be selected

V10~V200Series:

Features:

² Driven by an electric motor through a right angle gearbox

² Manual top cover safety system

² Open frame made of tubular legs

² Make movable design an option

² Mixing blade design: flat cross-section

V250~V1600 series

Features:

² Pneumatic roof safety system

² The counterweight facilitates the opening and closing of the top cover of the mixing mixer

(Due to its large weight, V1600 is equipped with a lifting/rotating cover)

² Exhaust pneumatic drive

² Easy to clean/inspect exhaust hinge design

² Fully enclosed equipment framework

For further detailed information, please also consult Nanjing Sivo.